Yamaha NS-SW310: AUTOMATIC POWER-SWITCHING FUNCTION Changing the AUTO STANDBY setting
AUTOMATIC POWER-SWITCHING FUNCTION Changing the AUTO STANDBY setting: Yamaha NS-SW310
Table of contents
- CAUTION: Read this before operating your unit
- • VOLTAGE SELECTOR SPECIAL INSTRUCTIONS FOR U.K. MODEL
- CONTENTS FEATURES
- SUPPLIED ACCESSORIES ATTACHING THE NON- SKID PADS
- PLACEMENT
- CONTROLS AND THEIR FUNCTIONS
- CONTROLS AND THEIR FUNCTIONS
- CONNECTIONS Connecting to line output (pin jack) terminals of the amplifier ■ Using one subwoofer
- ■ Using two subwoofers ■ Connecting to the LFE (INPUT3) terminal(s)
- Connecting to speaker output terminals of the amplifier ■ Using one subwoofer (with speaker cables) ■ Using two subwoofers (with speaker cables)
- ■ Using one subwoofer (with speaker cables) ■ Using two subwoofers (with speaker cables)
- Connecting to the INPUT1/OUTPUT Plug in the subwoofer to the AC outlet terminals of the subwoofer
- AUTOMATIC POWER-SWITCHING FUNCTION Changing the AUTO STANDBY setting
- ADJUSTING THE SUBWOOFER BEFORE USE
- Frequency characteristics
- ADVANCED YAMAHA ACTIVE SERVO TECHNOLOGY II
- TROUBLESHOOTING Problem Cause What to Do
- SPECIFICATIONS Limited Guarantee for European Economic Area (EEA) and Switzerland
AUTOMATIC POWER-SWITCHING FUNCTION
This function automatically switches the unit between standby and power-on mode.
The subwoofer automatically places itself in standby mode if it does not receive an input signal for 7 or 8 minutes. (The
power indicator lights red.)
When the subwoofer detects a bass signal input of below 200 Hz, it automatically places itself in power-on mode. (The
power indicator lights green.)
Notes
• This function is available only when the POWER switch and STANDBY/ON button are set to ON.
• Noise received from other appliances may extend the time period before the subwoofer places itself in standby
mode to more than 8 minutes.
Changing the AUTO STANDBY setting
1 Set the subwoofer to standby.
2 Change the AUTO STANDBY setting.
- LOW: Select this position to activate this function.
- HIGH: If this function does not operate with AUTO STANDBY switch set to LOW, select this position so that the
subwoofer detects input signals with a lower level and switches the power on automatically.
- OFF: Select this position to deactivate this function, for example, when the subwoofer switches the power on
unexpectedly by sensing noises from other appliances.
English
11 En
