Canon i-SENSYS MF4870dn: Choosing the Method to Connect the Machine to the Computer Connecting via a Wired LAN Connecting via a USB Cable
Choosing the Method to Connect the Machine to the Computer Connecting via a Wired LAN Connecting via a USB Cable: Canon i-SENSYS MF4870dn
Table of contents
- MF4890dw/MF4870dn MF4780w/MF4750/MF4730 MF4890dw/MF4780w
- Contents
- About the Supplied Manuals Navigating the Menu and Text Input Method
- Connecting the Power Cord and Turning ON the Power Specifying the Initial Settings
- Choosing the Method to Connect the Machine to the Computer Connecting via a Wired LAN Connecting via a USB Cable
- Setting a Paper Size and Type Specifying Initial Fax Settings and
- Perform Useful Tasks
- Clearing Paper Jams
- Replacing Toner Cartridge
- Symbols Used in This Manual Keys and Buttons Used in This Manual Illustrations and Displays Used in This Manual Important Safety Instructions
- Legal Notices
12
En
Choosing the Method to Connect the
Machine to the Computer
●
Connecting via a Wired LAN
(MF4890dw/MF4870dn/MF4780w Only)
See “Connecting via a Wired LAN”
You can connect the machine to the computer through a
wired router. Use the LAN cables to connect the machine
to the wired router (access point).
Make sure that there is an available port in the router to
connect the machine and the computer.
Have a LAN Cable of Category 5 twisted-pair cable or higher
ready.
●
Connecting via a USB cable
See “Connecting via a USB Cable”
You can connect the machine to the computer using a
USB cable.
●
Connection via a Wireless LAN
(MF4890dw/MF4780w Only)
See the Wireless LAN Setting Guide.
You can connect the machine to the computer through
a wireless router*. Since it is connected to wireless, no
LAN cables are needed.
* A wireless router (or access point), which supports
IEEE802.11b/g/n, is required.
If you do not sure whether your router is wireless or
wired:
See the instruction manual provided with your network
device, or contact the manufacturer.
Connecting via a Wired LAN
(MF4890dw/MF4870dn/MF4780w Only)
1
Connect the LAN cable.
The IP address will be automatically configured in 2
minutes. If you want to set the IP address manually, see
the following items.
e-Manual “Network Settings” ▶ “Basic Network
Settings” ▶ “Setting the IP Address”
2
Install the driver and software using the User
Software CD-ROM.
Proceed to “Setting a Paper Size and Type” (P.13).
Connecting via a USB Cable
Connect the USB cable after installing the MF Drivers and
the MF Toolbox.
1
Install the driver and software using the User
Software CD-ROM .
2
Connect the USB cable.
Proceed to “Setting a Paper Size and Type” (P.13).
