Acme MW04: Installation Speed Control Store receiver into the mouse Trouble Shooting Warning:

GB

Installation

1. Plug the micro receiver into a USB port of your computer

2. Open the battery door and install battery.

3. Mouse and receiver will start pairing process automatically.

4. After pairing process is done. You can start to use your mouse.

Speed Control

Default DPI is 1000. If you want to slow the DPI, push right and left keys together for over 3 seconds,

then the DPI will automatically change from 1000 to 500. Repeat the process, DPI will return to 1000

DPI.

Store receiver into the mouse

You can store the Micro Receiver by simply put the receiver into the hole of mouse bottom cover.

Trouble Shooting

1. Check Micro receiver connection; try to inserting Micro Receiver to another USB port on your

computer.

2. No connection between the mouse and the Micro Receiver:

• Re-inserttheMicroReceiver.

• Removethebatteryfromthemouseortakeanewone.

• Placethebatteryintothemouseagain.

• Reconnect thetwo devicesby usingthe“Connect“ button which is on the bottom of the

mouse.

Warning:

• Donotdisassembletheproductorremoveanyparts.

• Donotputtheproductintowateroranyliquid.

• Donotputtheproductclosetoheatsource,orexposeittohightemperature.

4