Acme BH05: Switch the headset on or off Pair the headset with a compatible phone Multipoint function Redial Disconnect the headset from the phone

GB

If charging does not start, disconnect the charger, plug it again, and retry. Charging the

battery fully may take up to 2 hours.

2. When the battery is fully charged, the blue indicator light will turn o. Disconnect the

charger from the wall outlet and the headset.

When the battery is running out of power, the blue indicator light starts to ash.

Switch the headset on or off

To switch on, press and hold the Answer/end key for 4 seconds. The blue indicator light starts

to ash.

To switch o, press and hold the power key for 4 seconds until the blue indicator light is

displayed briey.

Pair the headset with a compatible phone

1. Make sure your headset is turned o

2. Push the answer/end key for 7 seconds. The blue indicator light starts to ash.

3. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth

devices. See the user guide of your phone for instructions.

4. Select the headset (BH05) from the list of found devices.

5. Enter the password code 0000 to pair and connect the headset to your phone. In some

phones you may need to make the connection separately after pairing. See the user guide

of your phone for details. You only need to pair the headset with your phone once.

6. If the pairing is successful, the headset’s blue light will ash 2 times briey for the rst time

follow by a single ash every 5 seconds. The headset’s name appears in the phone menu

where you can view the currently paired Bluetooth devices.

Multipoint function

• In order to pair a second mobile phone, please press the volume down “s” button for 3

seconds, the LED will change rapidly, when it is steady Blue, the headset is ready for pairing

mode and you can pair the second mobile phone.

• Turn o the headset and turn it on again, both mobiles are ready to be linked.

• To activate the multipoint function, please press volume down “s” and volume up “r” at

the same time for 3 seconds, the headset will go into the multilink mode, the Blue LED will

show for 2 seconds.

• Press the volume up “r” button for 1.5 seconds to switch the calling between the two

phones. A short press of the power key will end the call, and in the meantime will connect

to the hold phone (some phones will ask if you want to connect the phone or not), pressing

the power key again will end the call.

Redial

Double-press the answer/end button and you can hear a beeping sound from the headset.

Release the button and the headset will dial the last dialled telephone number.

Disconnect the headset from the phone

To disconnect the headset from your phone (for example, to connect the phone to another

Bluetooth device) do one of the following:

· Switch o the headset.

3