Teka DSB 90 STAINLESS STEEL: Cleaning and maintenance Cleaning the metal filters

Cleaning and maintenance

Cleaning the metal filters

During cleaning and maintenance work, make

• Toremovethefiltersfromtheirfittings,press

sure the safety instructions are complied with.

lightlyonthelocksandthenpullthemoff.

• Themetalfilterscanbecleanedbysoaking

Cleaning the hood body

them in hot water with neutral detergent

• If your kitchen hood is made of stainless steel,

untilthefatdissolvesandthenrinsingthem

use proprietary cleaners mentioned in the

under the tap or using special anti-grease

GB

product instructions.

products. They can also be washed in a

• If your kitchen hood is painted, use lukewarm

dishwasher. In this case, itis advisableto

water and a neutral soap.

stackthemverticallytoavoidfoodresidues

tosticktothem.

• Never use metallic scourers, nor abrasive or

• Cleaninginadishwashermaydamagethe

corrosive products.

metallic surface (blackening it), although

• Dry the kitchen hood using a cloth that does not

thiswillnotaffectitsfatretentioncapacity.

produce fibres.

• Onceclean,leavethemtodryoffandthen

• Do not use vapour cleaners.

fitthemontothekitchenhood.

Changing light bulbs

Proceed as follows:

• Unscrew the lamp cover.

• Change the broken / burnt out lamp.

• Screw the lamp cover back in.