Garmin BC: Using TANITA Wireless Remote Tabletop Display

Using TANITA Wireless Remote Tabletop Display

Initial Setting

Battery Cover

Please make sure the scale is within 17feet (5m) with batteries inserted.

Insert batteries into the remote display.

Press any front panel button to start the communication process.

The wireless icon (

) on the display will blink while the remote display communicates

with the platform. After the communication is successfully done (wireless icon

disappears), continue to step 1 “Set Hour”.

Note: If the communication fails, the display will show "ErrC", press any front panel

button to restart the communication process.

1. Set Hour

Press s/t to set hour and then press SET.

The unit will beep once to confirm.

2. Set Minute

Press s/t to set minute and then press SET.

The unit will beep twice to confirm the programming.

Backlight Button

•

Resetting time

Upright Position

Press the clock button on the bottom of the remote display.

Then follow the procedure 1 and 2.

Setting and storing personal data in the memory

You will receive readings only if data has been programmed into the Tanita Remote Tabletop Display.

1. Select Personal Data Number

Use the SET button to activate the unit. Use s/t buttons to select a personal data number. Press SET.

2. Set Age

Use s/t buttons to select age. Press SET.

3. Select Female or Male

Use s/t buttons to select Female ( ) / Male ( ) / Athlete Female ( / ) / Athlete Male ( / ). Press SET.

4. Specify Height

Use s/t buttons to select height. Press SET.

Switching The Weight Mode

Select your preferred weight mode using the weight mode switch on the bottom of the Remote Display.

3

BC-1000win.indd 3 2010/04/26 19:39:41

Taking body composition readings

1. Before proceeding, make sure that the platform is within 17feet (5 m) of the remote display.

2. Press

t (User) button to turn the unit on and then press s/t buttons to select personal data number.

(Do not stand on the platform.)

3. Press the SET button to confirm your personal number.

4. When the remote display and platform are paired, the platform will beep once, and the Green Indicator Light will

blink.

5. Step onto the platform while the Green Indicator Light is blinking.

6. After the measurement is complete, the platform will beep twice, readings will automatically show on the remote

display.

7. Carefully step off platform after measurement is complete.

8. At anytime during and after the “Auto Display Process”, the user may use the

s/t buttons to scroll thru the different

results. For advanced scrolling, the user may press and hold s/t button.

Upon reading the desired readings, release the button to view the result, readings will appear for 30 seconds before

the unit automatically shuts off.

Note: For children (age 5-17), the unit will only display the Weight and the Body Fat % (it will not display the Healthy Range

Indicator).

Recall Function

The previous readings of the following features can be obtained using the recall function.

• Weight • Body Fat % • Total Body Water % • Muscle Mass • Physique Rating

• BMR/Metabolic Age • Bone Mass • Visceral Fat Level

To obtain previous readings, press the SET button while the current readings are being displayed.

The display will show the previous readings. To see other previous readings, press for each desired reading.

Press SET again to go back to the current result display.

Note: For children (age. 5-17), the unit will only display the previous Weight and the Body Fat %.

Programming The Guest Mode

Guest mode allows you to program the unit for a one-time use without resetting a Personal data number.

Press s button to activate the unit. Then follow the steps: Set Age, Select Female or Male, and Specify Height.

Taking Weight Measurement Only

Press the Weight-only key.

Step onto the platform while the Green Indicator Light is blinking.

After the measurement is complete, the platform will beep twice, readings will automatically show on the

remote display. Carefully step off platform after measurement is complete.

Warning

Do not use the body fat reading feature of this product if you have a pacemaker or other electronic implanted medical device.

4

BC-1000win.indd 4 2010/04/26 19:39:41