Beko WME 25080 T: Program Selection and Starting Machine

is completed “Ready” led will be on again.

“door” led on program progress display is on and laundry

During machine operation you can press “Start/Pause/

can be added to the machine. If “door” led is not on after

Cancel” key for getting machine to “Pause” position. In this

one minute than water level in the machine is not appropri-

case “Start/Pause/Cancel” led will blink.

ate and laundry can not be added. You can press “Start/

Pause/Cancel” key for continuing program.

Changing Program

You can use this feature for washing laundry in the same

Time delay for program start

textile group for washing at lower or higher temperatures.

Using time delay key you can delay the starting of the se-

For example, instead of Cotton60, Cotton40 can be used.

lected program for 3 hours, 6 hours or 9 hours.

For selecting Cotton40 instead of Cotton60 by pressing

When time delay key is pressed once 3hours delay is

“Start/Pause/Cancel” key machine is switched to pause

adjusted and led will light on. If same key is pressed once

position. Program knob is turned for selecting Cotton40

more delay is 6hours, and if it is pressed once more 9

program.

hours delay is selected. If time delay key is pressed again

Even when the program selection button is changed during

delay is cancelled. After the selection of time delay when

the program initially selected program will be executed. For

“Start/Pause/Cancel” is pressed program can be started

changing washing program continuing program must be

with delay. During delay period door can be opened or

cancelled. (See Cancelling a program)

laundry can be added

For selecting auxillary functions or spin speed necessary

After time delay is initiated by pressing “Start/Pause/Can-

changes can be performed after pressing Start/Pause/

cel” you can switch machine to “Pause” mode and change

Cancel button. Although selected auxillary functions must

delay time.

be compatible with washing program. For example when

your machine is intensive program you can select additional

rinse plus function but you can not select express.

Adding laundry

If you want to add laundry to your machine after program

begins press Start/Pause key for switching machine to

pause mode. If water level in the machine is appropriate

16

Canceling a Program

End of Program

For canceling a program “Start/Pause/Cancel” key is

When program ends “ door” led will light on and door can

pressed for three seconds. After this period “Start/Pause/

be opened and machine is ready for next washing. Press

Cancel” and all other leds will be off .You can select a new

“On/Off” for turning machine off.

program and start washing.

If cancel task is performed during washing “Spin” led on

display will light on, machine will pump and when “Spin” led

is off “door” led will be on, door can be opened and new

program can be selected.

Even program selection button is changed during the

program initially selected program will be executed. For

changing washing program “Canceling a program” must be

performed afterwards new program can be selected and

Emptying Laundry

started

After program ends machine automatically stops. Turn off

After machine starts operation even if spin speed or wash-

tap water. Pull the handle and open loading door. Turn off

ing temperature is changed, initial speed and temperature

your machine by pressing “On/Off”. After taking laundry

is valid. In order to change spin speed or temperature after

out keep the loading door open and let the drum ventilate.

pressing “Start/Pause/Cancel” new cycle or temperature

Check the bellow and clean.

can be selected.

17