Toshiba External SuperMulti Drive: Storing/Cleaning Storing the Disc Cleaning the Disc When the LED blinks
Storing/Cleaning Storing the Disc Cleaning the Disc When the LED blinks: Toshiba External SuperMulti Drive
Table of contents
- Conventions
- Checking the components Safety Instructions
- CAUTION CAUTION
- System Requirements You need to have a PC with the following specifications:
- The Grand Tour Front View Back View
- Features Versatile Multimedia Features DVD Recommended Disc Types
- CD Recommended Disc Types Buffer underrun free technology Reading / Recording Speed
- Installing Connecting to your computer
- Removing the USB Converter Cable Device Driver Checking for USB2.0 and Installing a USB Driver
- Confirming the Installation of the Device Driver Confirming Use [Device Manager] General Use How to Use the Drive How to Use a Horizontally Installed Drive
- How to Use DVD±R/RW and Other Discs
- Storing/Cleaning Storing the Disc Cleaning the Disc When the LED blinks
- Specification
- Description on Laser specification
- Troubleshooting
- Caution: Possible Error Problem Meaning / Solution
- The write speed for a disc can be restricted if: 1. The disc has bad properties data and/or there are other discs with different properties available under the same ID.
- TOSHIBA’s Standards for Write Speed Restriction. Copyright Statement Disclaimer Trademarks
- Regulatory Statements FCC information FCC notice “Declaration of Conformity Information” FCC Conditions Contact
- Industry Canada Requirement CE Compliance Working Environment
- Additional Environments not Related to EMC REACH Following information is only for EU-member states:
User’s Manual
EN-15
TOSHIBA External SuperMulti Drive
Storing/Cleaning
This part of the manual is to prevent damages or data loss. Read carefully
and use the device properly.
Storing the Disc
n
Do not place the drive under the direct sunlight.
n
Place it so that it sits on its side on a flat surface.
n
Do not scratch or place labels on the disc.
n
Handle the disc with caution to prevent damage from external shock.
n
Do not expose the drive to extreme temperatures. (Exposure to such
an environment may cause condensation.)
Cleaning the Disc
n
Do not touch the surface of the disc. Place your fingers on the edge of
the disc to hold.
n
Clean the disc lightly with soft cotton cloth, starting from the center and
move to the edge of the disc.
n
Use only disc-cleaning liquids. Do not use benzene, paint thinner, or
any other solvents.
When the LED blinks
The indicator light turns off when the drive is not in use (standby) after
disc lead-in.
If the disc surface becomes dirty with fingerprints, foreign
substances or dust, the disc may not function properly.
NOTE
LED
Meaning
Blinks every 0.8 seconds.
Disc Lead-In
Light On.
Writing
Light On.
Reading
Blinks every 1.6 seconds.
Audio Playback [Analog Mode]
Blinks every 1.6 seconds.
Audio Playback [Digital Mode]
Off
Standby
Off
No Disc
