Nikon 200MM F-2G ED AF-S VR II NIKKOR: ■ The built-in flash and vignetting ■ Using the lens hood
■ The built-in flash and vignetting ■ Using the lens hood: Nikon 200MM F-2G ED AF-S VR II NIKKOR
Table of contents
- Notes on Safety Operations
- Observe the following precautions when handling the camera and lens
- ■ Nomenclature
- En
- ■ Major features ■ Usable cameras and available functions
- ■ Focusing
- ■ Focus operation selection switch and focus operation button (See page 20 for compatible cameras.)
- ■ Vibration reduction mode (VR
- Setting the vibration reduction ON/OFF ring switch Setting the vibration reduction mode switch Notes on using vibration reduction
- ■ Depth of field ■ Setting the aperture ■ Using a built-in rotating tripod collar
- ■ The built-in flash and vignetting ■ Using the lens hood
- ■ Recommended focusing screens
- ■ Lens care ■ Standard accessories ■ Optional accessories
- ■ Specifications
- Ru
■ The built-in flash and vignetting
To prevent vignetting, do not use the lens hood.
Jp
Cameras
F65-Series/N65-Series*, F60-Series/N60*,
Vignetting occurs at any shooting distance.
En
F55-Series/N55-Series*, F50-Series/N50*,
F-601/N6006*, Pronea 600i/6i*, Pronea S
*Sold exclusively in the USA
De
■ Using the lens hood
Lens hoods minimise stray light and protect the lens.
Fr
Attaching the hood
• Fully tighten the lens hood screw (
2
).
Es
• If the lens hood is not correctly attached,
vignetting may occur.
Se
• To store the lens hood, attach it in the
reverse position.
Ru
Nl
■ Slip-in filter holder
Always use a (52mm screw-on) filter. A 52mm Screw-on Neutral Color NC Filter
is attached to the filter holder when shipped from the factory.
It
1
Press down on the slip-in filter holder knob, and
turn counterclockwise until the white line on the
Ck
knob is at a right angle to the axis of the lens.
2
Pull the slip-in filter holder from the lens body
Ch
3
Detach the attached filter from the filter holder.
Kr
4
Screw a filter onto the side of the filter holder
marked with the words “Nikon” and “JAPAN”.
• The slip-in filter holder can be attached with the
“Nikon” and “JAPAN” facing either the lens or
camera side without any effect on your pictures.
Slip-in Circular Polarizing Filter C-PL3L (optional)
• Blocks reflections from nonmetallic surfaces such as glass and water.
• When a Slip-in Circular Polarizing Filter C-PL3L is attached, the focus distance
is different from when a 52mm screw-on filter is attached. The distance scale
is shifted from the correct position. The closest focused distance is extended
slightly.
• The memory set position may change slightly when using focus preset. Attach
the C-PL3L filter before using the memory set function.
26
