Fieldmann FZN 2002-E: 12. TROUBLESHOOTING (Fig. 6)

Troubleshooting

12. TROUBLESHOOTING (Fig. 6)

WARNING! Prior to troubleshooting, always unplug the mains plug and slide the

safeguard 8 over the cutter blades 9.

Fault Possible Cause Solution

Electric hedge trimmer does

Extension cable is not plug-

Plug in or replace the extensi-

not start.

ged in or is damaged.

on cable, if needed.

While rotating the cutting unit,

While rotating the cutting unit,

the lock button did not enga-

the lock button must engage

ge in 0° or ±90° position.

in 0° or ±90° position.

While tilting the swivel head,

While tilting the swivel head,

the lock button did not en-

the lock button must engage

gage in the position ranging

in the position ranging from

from +60° and -80°.

+60° and -80°.

Electric hedge trimmer does

Extension cable is damaged. Plug in or replace the extensi-

not work continuously.

on cable, if needed.

Internal wire is damaged. Find the faulty point and

replace the internal wire.

Trigger is damaged. Find the faulty point and

replace the trigger.

Electric hedge trimmer does

Blunt or damaged blades. Have the blades sharpen or

not work cleanly.

thoroughly cleaned.

Find the faulty point and

replace the cutter blades.

Excessive friction due to lack

Apply the spray grease.

of grease.

WARNING! Should other problems occur, contact the local service centre. The electric

hedge trimmer shall be repaired exclusively by the local service centres or authorised dealers.