Beko DNE 54530 GB: 3 Installation

3 Installation

BPlease remember that the

manufacturer shall not be held

liable if the information given in the

instruction manual is not observed.

Points to be considered

when re-transporting your

refrigerator

1.Your refrigerator must be emptied and

cleaned prior to any transportation.

2.Shelves, accessories, crisper and etc.

in your refrigerator must be fastened

securely by adhesive tape against

3.Clean the interior of the refrigerator as

any jolt before repackaging.

recommended in the “Maintenance

3.Packaging must be tied with thick

and cleaning” section.

tapes and strong ropes and the

4.Plug the refrigerator into the wall outlet.

rules of transportation printed on the

When the fridge door is open, the

package must be followed.

fridge compartment interior light will

Please do not forget…

come on.

Every recycled material is an

5.You will hear a noise as the

indispensable source for the nature

compressor starts up. The liquid and

and for our national resources.

gases sealed within the refrigeration

If you wish to contribute to recycling

system may also give rise to noise,

the packaging materials, you can

even if the compressor is not running

get further information from the

and this is quite normal.

environmental bodies or local

6.Front edges of the refrigerator may feel

authorities.

warm. This is normal. These areas

Before operating your

are designed to be warm to avoid

refrigerator

condensation

Before starting to use your refrigerator

Electric connection

check the following:

Connect your product to a grounded

1.Is the interior of the refrigerator dry and

socket which is being protected by a

can the air circulate freely in the rear

fuse with the appropriate capacity.

of it?

Important:

2.Please install the 2 plastic wedges

• The connection must be in compliance

as illustrated in the figure. Plastic

with national regulations.

wedges will provide the required

• The power cable plug must be easily

distance between your refrigerator

accessible after installation.

and the wall in order to allow the air

• The specified voltage must be equal to

circulation. (The illustrated figure is

your mains voltage.

only an example and does not match

• Extension cables and multiway plugs

exactly with your product.)

must not be used for connection.

9

EN