Nikon AF-S Nikkor 300mm f/2.8G ED VR II:  The built-in flash and vignetting  Using the lens hood  Slip-in filter holder

 The built-in flash and vignetting

To prevent vignetting, do not use the lens hood.

Jp

Cameras

Vignetting occurs at any

F65-Series/N65-Series*, F60-Series/N60*, F55-Series/N55-Series*,

En

shooting distance.

F50-Series/N50*, F-601/N6006*, F-401x/N5005*, F-401s/N4004s*,

F-401/N4004*, Pronea 600i/6i*, Pronea S

De

* Sold exclusively in the USA

 Using the lens hood

Lens hoods minimise stray light and protect the lens.

Fr

Attaching the hood

Es

• Fully tighten the lens hood screw (2).

• If the lens hood is not correctly attached, vignetting

may occur.

Se

• To store the lens hood, attach it in the reverse

position.

Ru

Nl

 Slip-in filter holder

Always use a (52mm screw-on) filter. A 52mm Screw-on NC Filter is attached to

It

the filter holder when shipped from the factory.

a

Press down on the slip-in filter holder knob, and turn

Ck

counterclockwise until the white line on the knob is

at a right angle to the axis of the lens.

Ch

b

Pull the slip-in filter holder from the lens body

c

Detach the attached filter from the filter holder.

Kr

d

Screw a filter onto the side of the filter holder

marked with the words “Nikon” and “JAPAN”.

• The slip-in filter holder can be attached either facing

lens or camera side without having any effect on your

pictures.

Slip-in Circular Polarizing Filter C-PL1L (optional)

• Blocks reflections from nonmetallic surfaces such as glass and water.

• The focus point of a Slip-in Circular Polarizing Filter C-PL1L differs from that of

a 52mm screw-on filter. The distance scale is shifted from the correct position.

The closest focused distance is extended slightly.

• The memory set position may change slightly when using focus preset. Attach

the C-PL1L filter before using the memory set function.

26