Yamaha KMA-700: NAMES OF PARTS AND THEIR FUNCTIONS Front panel

PREPARATION

NAMES OF PARTS AND THEIR FUNCTIONS

Front panel

PREPARATION

The shaded part ( ) is provided for KMA-700 only.

1 POWER (ON/OFF)

0 MIC

Turn the power ON/OFF.

Adjust the overall volume of all microphones.

2 MUSIC BALANCE

A Remote sensor

Adjust the volume balance.*

This sensor receives signals from the remote control.

3 MUSIC TONE (BASS/TREBLE)

B ECHO

Adjust the low/high frequency response.*

Adjust the amount of echo.

4 MIC ECHO DELAY

C INPUT/Input source indicators (DVD/AUX**/

Adjust the delay time between echoes.*

TAPE/BGM)

INPUT is not available in the default setting.

5 MIC ECHO REPEAT

To activate INPUT, refer to “Input mode” on page 14.

Adjust the amount of feedback.*

Input source indicators indicate the input source currently

6 ECHO MODE

active.

Select NORMAL, WIDE (stereo) or SPACIOUS** echo.

D MUSIC

SPACIOUS echo is an effect that produces both

Adjust the volume of the music source.

NORMAL and WIDE echo with a time lag. The LED

lights up in amber/green** when WIDE/SPACIOUS**

E KEY CONTROL

echo is selected.

To transpose the key of the played music, rotate this

control. The key can be changed in halftone steps in 5

7 MIC TONE (BASS/MID/TREBLE)

steps; either higher or lower. To reset the key to the

Adjust the low/middle/high frequency response of

natural key, press this control. If over 4 seconds of silence

microphones.*

occurs, the unit assumes the played song has finished and

English

8 MIC jacks (1/2/3**)

resets the key to natural.

Connect microphones to these jacks.

* Use a flathead screwdriver to adjust.

9 MIC VOL (1/2/3**)

** KMA-700 only

Adjust the microphone input level.*

3 En