Nikon AF-S DX 18-105mm f-3.5-5.6G ED VR: Major features Mounting the lens Removing the lens Using the Lens Hood HB-32 1

Thank you for purchasing the AF-S DX NIKKOR 18-105mm f/3.5-5.6G ED VR lens. DX Nikkor lenses are specially

designed for use with Nikon digital-SLR (Nikon DX-format) cameras, such as the D300 and D90. When mounted on

Nikon DX-format cameras, the lens picture angle is equivalent to approximately 1.5× the focal length in 35mm

format. Before using this lens, please read these instructions and refer to your camera’s User’s Manual.

Major features

aperture produces soft and pleasing blur

• By enabling vibration reduction (VR), slower shutter

characteristics in portions of pictures that are out-of-

speeds (approximately three stops*) can be used,

focus.

thus increasing the range of usable shutter speeds

Mounting the lens

and zoom positions, particularly when hand-holding

1

Turn the camera off.

the camera.

2

Remove the rear lens cap (Fig. D).

(*Based on results achieved under Nikon

3

Align the mounting index 9 on the lens with the

Jp

measurement conditions. The effects of vibration

mounting mark on the camera, and rotate the lens

reduction may vary according to shooting conditions

En

counterclockwise until it clicks into place. Be sure

and use.)

that the lens is in the correct position when the

De

• This lens employs a Silent Wave Motor to drive the

mounting index 9 is on the top of the lens.

Fr

focusing mechanism, making autofocusing smooth,

4

Remove the front lens cap (Fig. C).

silent and almost instantaneous. The A-M mode

Es

switch a is provided for simple selection of

Removing the lens

Se

autofocus (A) or manual focus (M) operation.

Turn the camera off before removing the lens. Press and

Ru

• More accurate exposure control is possible when this

hold the lens-release button on the camera while

is mounted on a Nikon camera with 3D color matrix

turning the lens clockwise.

Nl

metering capability, because subject distance

It

Using the Lens Hood HB-32 1

information is transferred from the lens to the camera.

Ck

• Superior optical performance and rendering

Attaching the hood

characteristics are maximized with the use of one

Ch

Align the lens hood attachment index ( , either of

aspherical lens element and one extra-low dispersion

two indexes) 2 on the hood with the lens hood

Kr

(ED) glass element, which ensure correction of

mounting index 4 on the lens, and turn the hood 1

chromatic aberration. In addition, the rounded

counterclockwise (as viewed when holding the camera

14