Nikon 16-35MM F 4G AF-S VR ZOOM-NIKKOR: Vibration reduction mode (Fig. B)
Vibration reduction mode (Fig. B): Nikon 16-35MM F 4G AF-S VR ZOOM-NIKKOR
Table of contents
- Notes on Safety Operations CAUTION
- Nomenclature
- Major features Usable cameras and available functions
- Focusing (Fig. A)
- Vibration reduction mode (Fig. B)
- Focusing, zooming, and depth of The built-in flash and vignetting field Setting the aperture
- Using the lens hood Recommended focusing screens
- Lens care Standard accessories Optional accessory
- Specifications
- Notes on using wide- or super wide-angle AF NIKKOR lenses
Vibration reduction mode (Fig. B)
• Do not turn the camera off or remove the lens
Jp
from the camera while vibration reduction is
Setting the vibration reduction ON/OFF
operating. Failure to observe this note could
En
switch
result in the lens sounding and feeling as if an
ON: The effects of camera shake are reduced
internal component is loose or broken when it is
while the shutter-release button is pressed
De
halfway and also at the instant the shutter is
shaken. This is not a malfunction. Turn the
released. Because vibration is reduced in the
camera on again to correct this.
Fr
viewfinder, auto/manual focusing and exact
• With cameras featuring a built-in flash, vibration
framing of the subject are easier.
reduction does not function while the built-in
Es
OFF: The effects of camera shake are not reduced.
flash is charging.
Notes on using vibration reduction
• With autofocus cameras featuring an AF-ON
Se
• After pressing the shutter-release button halfway,
button, vibration reduction does not function
wait until the image in the viewfinder stabilizes
when the AF-ON button is pressed.
Ru
before pressing the shutter-release button the
• When the camera is mounted on a tripod, set the
rest of the way down.
vibration reduction ON/OFF switch to OFF.
Nl
• Due to the characteristics of the vibration
However, it is recommended that the switch be
reduction mechanism, the image in the
set to ON when using the camera on an
It
viewfinder may be blurred after the shutter is
unsecured tripod head or with monopod.
released. This is not a malfunction.
• If this lens is used with cameras that do not have
Cz
• If the camera is panned in a wide arc,
the vibration reduction function (P.16), set the
compensation for camera shake in the panning
vibration reduction ON/OFF switch to OFF. With
Sk
direction is not performed. For example, only the
the Pronea 600i/6i camera, in particular, battery
effects of vertical camera shake is reduced with
power may become quickly depleted if this switch
Ck
horizontal panning.
is left ON.
Ch
Kr
18
