Xerox DOCUCOLOR 252: Replacing the Toner Cartridges

Replacing the Toner Cartridges: Xerox DOCUCOLOR 252

Replacing the Toner Cartridges

1. Replace the toner cartridge while the

machine is on. Open the toner cover, located

DocuColor 242/252/260

Quick Use Guide

DocuColor 242/252/260

just above the machine front door.

CAUTION: Before you begin the procedure,

ensure that the machine has been allowed to

cool down. Failure to do so may result in burns

if certain parts of the machine are touched.

2. Lay paper on the floor before removing

the cartridge. This will allow any excess

toner to fall on the paper. Hold the handle of

the colour indicated in the message, and

gently pull it out.

3. Remove the toner cartridge by

holding the handle on the top of the

cartridge while gently pulling it straight

out. Be careful to not get toner on

clothing.

4. Dispose the toner cartridge as

normal office waste or recycle the

cartridge.

Replacing the Toner Cartridges

5. Remove the new toner cartridge from its

packaging.

6. Gently tilt the new cartridge up and down,

and then left and right to redistribute the

toner.

7. Install the toner cartridge by aligning the

arrows on the cartridge evenly with the

printer until you hear a click.

8. Close the Front Door. If the door will not close

completely, make sure the cartridge is in the lock

position and the toner cartridge is installed into the

appropriate toner location.

CAUTION:Never use a vacuum cleaner when you

clean spilled toner. It can cause explosion as the

toner fills the vacuum cleaner and gets sparks.

Use a broom or a cloth moistened with a neutral

detergent.

That completes the procedure for replacing the toner cartridge.

DocuColor 242/252/260

Quick Use Guide

DocuColor 242/252/260