Peg-Perego Classico: WARNING

WARNING: Peg-Perego Classico

background image

   OPENING THE CHASSIS

 • 

 We recommend setting the brake on the chassis 

before opening it, to make the operation easier.

 8•   To open the chassis, unhook the clasps and push 

them inwards, as shown in the figure.

 9•   Lift the handle and pull it all the way up until it 

clicks into place. 

 10•   Open chassis. The correct open position for the 

chassis can be verified by checking safety hook A. 

If it is in the position shown in figure B, push the 

handle further down, until it clicks into place.

   ADJUSTABLE HANDLE

 11•   To adjust the height of the handle, press 

simultaneously on the side buttons and lock the 

handle into the desired position.

   REMOVING THE WHEELS

 12•   To remove the wheels, lower the little lever on the 

center of the wheel, as shown in the figure. At the 

same time, push the wheel outwards.

   CLOSING THE CHASSIS

 13•   To close the chassis, pull the two levers on the 

handle upwards, as shown in the figure.

 14•   Lift the safety hook.

 15•   Lower the handle until it clicks into place.

 16•   Closed chassis.

GANCIOMATIC SYSTEM

 17•   ”Ganciomatic System” is the practical, fast system 

that allows you to attach the Primo Viaggio or 

Navetta bassinet unit, the Primo Viaggio child 

car seat, and the Seat Unit carrier seat to the 

Ganciomatic Base of the chassis with a single flick 

of the hand. All you need to do is set the unit on 

the Ganciomatic Base and press on it with both 

hands until it clicks into place. Before attaching or 

detaching the other units to the Ganciomatic Base, 

always set the chassis brake. 

 • 

 To disconnect the products from the chassis 

consult the respective instruction manuals.

CLEANING & MAINTENANCE

Your product requires only minimal maintenance. 

Cleaning and maintenance operations must be 

performed only by adults.

•   Be sure to keep all moving parts clean, lubricating 

them with light oil if necessary.

•   Dry off metal parts to prevent rusting.

•   Regularly clean the plastic parts with a damp cloth. 

Do not use solvents or similar products.

•   Remove any dust and sand from the wheels.

•   Protect the product against smog, water, rain and 

snow. Continued and extended exposure to sunlight 

can change the colours of many materials.

•   Store the product in a dry area.

WARNING

•   THIS VEHICLE HAS BEEN DESIGNED FOR THE 

TRANSPORT OF ONE CHILD.

•   DO NOT USE THE PRODUCT FOR A GREATER NUMBER 

OF OCCUPANTS THAN THAT INTENDED BY THE 

MANUFACTURER.

•   ASSEMBLY AND PREPARATION OF THE ARTICLE MUST 

BE CARRIED OUT BY ADULTS.

•   DO NOT USE THE PRODUCT IF THERE ARE MISSING 

OR BROKEN PARTS.

•   IT COULD BE DANGEROUS TO LEAVE YOUR CHILD 

UNATTENDED.

•   WHEN STATIONARY ALWAYS USE THE BRAKES.

•   BEFORE USE MAKE SURE THAT ALL OF THE 

ATTACHMENT MECHANISMS ARE CONNECTED 

CORRECTLY.

•   BEFORE USE MAKE SURE THAT THE CAR SEAT OR THE 

CARRYING SEAT ARE CORRECTLY ATTACHED.

•   DO NOT PUT YOUR FINGERS IN THE MECHANISMS.

•   TAKE CARE WHEN ADJUSTING THE MECHANISMS 

(HANDLEBAR, BACKREST) WITH THE CHILD PRESENT.

•   ANY LOAD HANGING FROM THE HANDLEBAR OR 

THE HANDLES CAN MAKE THE PRODUCT UNSTABLE; 

FOLLOW THE MANUFACTURER

ʼ

S INDICATIONS 

REGARDING THE MAXIMUM LOADS.

•   DO NOT PLACE LOADS WEIGHING OVER 5 KG IN THE 

BASKET. DO NOT PLACE WEIGHTS IN THE DRINK-

HOLDERS GREATER THAN THOSE SPECIFIED ON THE 

DRINK-HOLDERS THEMSELVES AND NEVER PUT HOT-

DRINKS IN THEM. DO NOT INSERT WEIGHTS GREATER 

THAN 0.2 KG IN THE POCKETS OF THE HOODS (IF 

PRESENT).

•   DO NOT USE THE PRODUCT NEAR STAIRS OR STEPS; 

DO NOT USE NEAR HEAT SOURCES, OPEN FLAMES OR 

DANGEROUS OBJECTS THAT ARE WITHIN REACH OF 

THE CHILD.

•   IT COULD BE DANGEROUS TO USE ACCESSORIES 

WHICH ARE NOT APPROVED BY THE MANUFACTURER. 

•   THIS PRODUCT IS NOT SUITABLE FOR JOGGING OR 

ROLLER SKATING.