Cambridge Audio Multi-room speaker system: Incognito Multi-Room Incognito multi-room

Incognito Multi-Room

Incognito multi-room

does not fit, contact your electrician to replace your obsolete outlet.

Damage rrequiring sservice

– Refer any part of this system requiring

Do not defeat the safety purpose of the polarized plug.

repair to an authorised Incognito service agent only.

Power-ccord pprotection

– Power supply cords should be routed so

Heat

– The product should be situated away from heat sources such

that they are not likely to be walked on or pinched by items placed

as radiators, heat registers, stoves, or other products (including

upon or against them, paying particular attention to cords at plugs,

amplifiers) that produce heat.

mains sockets/outlets, and the point where they exit from the

product.

Protective aattachment pplug

– In some countries product may be

equipped with a plug having overload protection (fuse). This is a

safety feature. If replacement of the plug is required, be sure the

service technician has used a replacement plug specified by

the manufacturer that has the same overload protection as the

original plug.

Lightning

– For added protection for this product during a lightning

storm, or when it is left unattended and unused for long periods of

time, unplug it from the wall outlet. This will prevent damage to the

product due to lightning and power-line surges.

Overloading

– Do not overload wall outlets, extension cords, or

integral mains sockets/outlets as this can result in a risk of fire or

electric shock.

Object aand lliquid eentry

– Never push objects of any kind into this

product through openings as they may touch dangerous voltage

points or short-out parts that could result in a fire or electric shock.

Never spill liquid of any kind on the product.

Servicing

– Do not attempt to service this product yourself as

opening or removing covers may expose you to dangerous voltage or

other hazards. Refer all servicing to an authorised service agent.

Incognito multi-room 5

6 Incognito multi-room

AUDIO CONNECTIONS

PS10 ppower ssupply tto AAH10

For each AH10 with up to four main zones connected (and no sub-

zones) one PS10 is required.

Sub-zones require a separate PS10 power supply.

Speaker cable

Speaker cable

For each AH10 (with both main and sub-zones connected) two x

PS10 power supplies are required.

AH10 tto KKP10

Using a single Cat-5e cable, connect each KP10 to the AH10 via an

RJ45 plug using the EIA/TIA 568A wiring standard (see below) at the

AH10, and an eight-way colour-coded connection at the keypad.

1 – white/green

5 – white/blue

2 – green

6 – orange

3 – white/orange

7 – white/brown

4 – blue

8 – brown

The Cat-5 connection from AH10 to KP10 should not exceed 30m/ 100 ft.

Sub-zones connections are made in the same way as main zone

connections but from the sub-zone sockets (see illustration on page 9).

KP10 tto SSS10 oor oother lloudspeakers

Connections for one AH10 with two main zones attached

Connect the KP10 to a pair of speakers with two runs of standard

high-quality speaker cable.