Cambridge Audio Multi-room speaker system: Incognito multi-room

Where aa VVH10 vvideo sswitcher hhas bbeen sspecified

The VH10 is linked to the AH10 via a Cat-5e patch cable (supplied

with the VH10), connected to the expansion sockets on both units.

This provides power, and input switching commands direct from the

system remote control or KP10.

Main video displays are connected to the VH10 at the ‘main zone’

sockets via high quality RG6/CT100 co-axial cable terminated at

the VH10 by a phono/RCA plug. No external power is required by the

VH10 it is powered by the AH10.

Sub-zone video displays are connected in the same way, but to the

four sub-zone sockets on the VH10.

Incognito multi-room 7

Incognito multi-room

VIDEO CONNECTIONS

SUB-ZONE

Cat5

Coax cable

Coax cable

MAIN ZONE

Cat5

Connections between AH10 and VH10 with two main zones and a

sub-zone attached

SOURCE CONNECTIONS

Audio ssource cconnections

It is possible to connect a total of six audio source components to

the AH10. The connections are made from a line level output on the

source equipment to one of the six inputs on the AH10 using

RCA/phono to RCA/phono cables.

Video ssource cconnections

When using a VH10 each of the six sources can also supply video.

The connections are made from a composite video output on the

source equipment to one of the six inputs on the VH10 using good

quality 75ohm RCA/phono to RCA/phono video cables.

Remote ccontrol oof ssource eequipment tthrough tthe KKP10

For remote control of the source equipment, six routed IR outputs

are provided. Individual IR emitters are plugged into the appropriate

IR output (corresponding to the respective audio input) the other

end is stuck to the IR receiving window of the source equipment

(see below).

8 Incognito multi-room

Detail of audio connections between

a tuner and AH10

Stereo RCA/phono leads

Side 1 connections of AH10

Detail of video connections between

a DVD player and VH10

75ohm video RCA/phono cable

Side 1 connections of VH10