Bodum BISTRO Электрический чайник: BISTRO

– Do not operate the kettle on an inclined plane, Do not

operate the kettle unless the element is fully immersed. Do

not move while the kettle is switched on.

– To prevent damage to the appliances do not use alkaline

cleaning agents when cleaning, use a soft cloth and a mild

detergent.

INSTALLATION

– Place the appliance on a stable flat surface which is

neither hot nor near a heat source. The surface must be

dry. Keep the appliance and its mains cable out of reach

of children.

– During use, do not place the base unit on a metal tray or a

BISTRO

metal surface.

– Ensure that the voltage indicated on the rating plate

of the appliance agrees with the mains voltage in your

area. Connect the appliance only to a properly earthed

power point with a minimum output of 6A. (Use a residual

current device (RCD) seek the advice of an electrician.)

While the appliance is in use, the mains plug must be acces-

sible in case of an emergency. To ensure continued pro-

tection against risk of electric shock, connect to properly

grounded outlets only

– If the power point is unsuitable for accommodating the

plug of your appliance, have the power point changed by

a licensed electrician.

SAVE THESE INSTRUCTIONS

PARTS OF THE KETTLE

1 Hinged lid

2 Push button to open lid

3 Scale filter

4 Water level gauge

5 ON/OFF switch

6 ON/OFF indicator light

7 Base unit

8 Max water level indicator

9 Min water level indicator

77

SPECIAL INSTRUCTIONS

POWER-SUPPLY CORD

– A short power-supply cord is to be provided to reduce risks

resulting from becoming entangled in or tripping over a

longer cord.

– Extension cords are available and may be used if care is

exercised in their use.

– If an extension cord is used, the marked electrical rating

of the extension cord should be at least as great as the

electrical rating of the appliance, if the appliance is of the

grounded type, the extension cord should be grounding

-type 3-wire cord. The longer cord should be arranged so

that it will not drape over the counter top or table top

where it can be pulled on by children or tripped over.

SWITCHING OFF THE KETTLE MANUALLY

The ON/OFF switch (5) can also be used to switch off the

kettle before the water boils.

SAFETY CUT-OFF

INSTRUCTION FOR USE

The kettle is protected against damage resulting from use

with an insufficient volume of water. A safety cut-off will

automatically disconnect the power supply if the heating

element overheats.

Should the kettle ever boil dry during operation, you must

leave it to cool for 10 minutes before re-filling it with cold

water. The safety cut-off will reset automatically once it has

cooled.

BEFORE USING THE KETTLE

Clean the kettle before using it for the first time by filling it

completely (to the MAX mark) with water, boiling the water,

and then discarding the water.

HOW TO USE THE WATER KETTLE

FILLING THE WATER KETTLE

– Remove the appliance body from the base unit (7).

– Open the lid (1), fill with water and close the lid again.

Do not fill the kettle with less than 0.15l/4 oz and not

more than 0.5l/17 oz (above the MAX mark), to prevent

the kettle from boiling dry or boiling water escaping from

the spout.

78