Binatone MRFP-8810 D: SPECIAL SAFETY MEASURES

SPECIAL SAFETY MEASURES: Binatone MRFP-8810 D

SPECIAL SAFETY MEASURES

Do not place the food steamer near or under

curtains, shelves, cupboards or other items, which

may be damaged by steam.

Do not touch any hot surfaces of the steamer

– baskets, lid, rice bowl or drip tray.

Remove steamer lid, baskets and the rice bowl

ENGLISH

using oven gloves or a towel. To prevent accidents

we recommend that you slowly open the lid so that steam

escapes in a direction away from yourself. Only lift baskets by

the handles.

Never switch the appliance on without water in the water

reservoir, as this may lead to damage to the heating element.

While operating the steamer, make sure the water level does

not drop below the minimum mark as it may result in the

appliance’s failure. If the water level drops to the minimum

mark, add water to the water reservoir (see subsection

“Assembly and operation of the steamer”).

Do not place paper or foil on the bottom of steamers as it can

block the steam vents.

Do not put anything on top of the steamer when in use.

When cooking in the steamer we recommend you to use wa-

ter with a minimum salt content as this will help to reduce

mineral deposits on the steamer’s heating element. Remember

that deposits shorten the service life of the appliance. Always

keep the heating element clean. Use only recommended clean-

ing agents (see section “Care and cleaning”).

Do not wrap the power cord around the steamer’s housing.

Never clean the device immediately after using it. Leave it cool

down.

PARTS OF THE

APPLIANCE

1. Cover

2. Steam containers

3. Rims for the bottom of steam container

4. Bowl for rice

5. Opening for water refill

6. Water reservoir

7. Container for steam condensation

8. Adaptor-ring

9. Steam concentrator

10.Body of the steamer

11.Water level indicator

12.LCD-display

13.Control panel:

a) “MENU” button – selection of programme and cooking time

b) “+” and “-” buttons – increasing/decreasing operation time

c) “START/STOP” button – switching on/off

14.Power cable

15.Heating element

5