Vaddio HE120 Operating Instructions: Network settings

Network settings

 Installing the software

Be absolutely sure to read through the “Readme.txt” on the

CD-ROM supplied with the unit first before attempting to

 If the Easy IP Setup Software is run when using

install the software.

Microsoft

®

Windows

®

XP Home Edition SP3, an important

warning screen concerning security may appear.

If this is the case, click the [Unblock(U)] button.

 If the Easy IP Setup Software is run when using

Software provided on the CD-ROM

Microsoft

®

Windows Vista

®

, you may be prompted to enter

the password for the Administrator account.

 Easy IP Setup Software ( EasyIPSetup.exe)

If this is the case, disable “User Account Control” from

This software establishes the unit’s network settings.

Control Panel.

For details, refer to the sections that follow.

 The Easy IP Setup Software is designed in such a way

that when around 20 or more minutes have passed

after the power was turned on, the MAC address and IP

address of the target camera will no longer be displayed.

It does this to improve the security.

 For details of the display time setting, refer to “Easy IP

Setup accommodate period” (page 79 in the <Operations

and Settings>).

 The Easy IP Setup Software cannot be used from a

different subnet via a router.

 Use the Easy IP Setup Software

 The unit cannot be displayed or its settings established

to establish the unit’s settings

using an older version of the Easy IP Setup Software

(Ver.2.xx).

The settings related to the unit’s network can be established

 IPv6 is not supported.

using the Easy IP Setup Software supplied.

To establish the settings for a multiple number of units, the

settings must be selected for each camera involved.

If the settings cannot be established using the Easy IP Setup

Software, select the settings separately for the unit and PC

on the network page of the setting menu.

For further details, refer to the “Operating Instructions —

<Operations and Settings>” (PDF file).

Notes

 If, after the network settings have been established,

another device in the same network has the same IP

address, the network operations will not be performed

properly.

Set the IP address in such a way that it does not

duplicate an existing IP address.

 Do not establish network settings from a multiple

number of Easy IP Setup Software programs at the

same time for a single camera.

Similarly, do not perform the “Auto IP setting” operation

of the AW-RP50 remote camera controller at the same

time.

The IP address settings may no longer be recognized

as a result.

40

Network settings

(continued)

1 Start the Easy IP Setup Software.

 After the [Apply] button is clicked, it takes about

2 Click the MAC address/ IP address of the

2 minutes for the settings in the unit to be completed.

camera to be set, and click the [IP setting]

If the AC adaptor or LAN cable is disconnected

button.

before the settings are completed, the settings will be

canceled. In this case, repeat the steps to establish

the settings.

 When a firewall (including software) has been

introduced, enable access to all the UDP ports.

Notes

 When a DHCP server is being used, the IP

address allocated to the unit can be checked by

clicking the [Refresh] button of the Easy IP Setup

Software.

 If IP addresses are in contention, the MAC address

of the camera concerned is the one shown with the

Operating

Instructions

shading.

3 Input the network items, and click the [Apply]

button.

Note

Preparation

 When a DHCP server is being used, “DNS” of the

Easy IP Setup Software can be set to “AUTO”.

41