Vaddio HE120 Operating Instructions: Stand-alone installation (when the mount bracket is going to be used)

Stand-alone installation (when the mount bracket is going to be used)

The same steps are followed as for the kind of installation where the unit is suspended from an overhead surface

(pages 8 to 11).

1 Check the mounting space.

Note

 As with installing the unit suspended from an overhead surface, carefully check the space where the unit will be

mounted, and then decide if it is appropriate to install the unit in that space.

Installation

Instructions

2 Mount the mount bracket onto the installation surface.

Bracket mounting screws  4 (supplied)

(M4, bind-head)

3 Attach the drop-prevention wire.

4 Mount the unit.

 Align the position of the hole for checking the positioning with the status display lamp.

 Align the holes on the camera main unit used to insert the bottom panel with the protrusions on the mount bracket used

for inserting the camera, push the bracket and camera firmly together, and rotate the main unit by about 20 degrees in

the direction of the arrow.

 Secure the mount bracket to the unit using the main unit mounting screw (M3) as supplied.

Approx. 20°

Status display lamp

On the camera main unit:

Holes (3) used to insert

the bottom panel

Main unit mounting screw

(M3 screw)

(with flat washer, spring

washer)

On the mount bracket:

Protrusions (3) used for

inserting the camera

Hole for checking the

positioning

Attach the drop-prevention

wire.

15