Vaddio HE120 Operating Instructions: Setting the remote control IDs

Setting the remote control IDs

The wireless remote control (optional accessory) is capable

of operating up to four units.

IDs are used to set which units are selected when the

[CAM1], [CAM2], [CAM3] and [CAM4] buttons on the

wireless remote control have been pressed.

 When operating a multiple number of these units using

wireless remote controls, set a different remote control ID

for each control.

 When using one unit, set the remote control ID to “CAM1”

unless the setting needs to be changed.

Setting procedure

Operate the IR ID switch on the units rear panel, and select

“CAM1”, “CAM2”, “CAM3” or “CAM4” as the remote control

ID. (See page 36)

The IR ID switch settings “CAM1” to “CAM4” correspond to

the [CAM1] to [CAM4] buttons on the wireless remote control.

(The factory setting is “CAM1”.)

Operating

Instructions

IR ID switches

[CAM1] to [CAM4] buttons

Preparation

39