Главная > Инструкция к Vaddio HE120 Operating Instructions > Read this first! (For AW-HE120WE, AW-HE120KE)

Vaddio HE120 Operating Instructions: Read this first! (For AW-HE120WE, AW-HE120KE)

Vaddio

Read this first! (For AW-HE120WE, AW-HE120KE): Vaddio HE120 Operating Instructions

Read this first! (For AW-HE120WE, AW-HE120KE)

DO NOT REMOVE PANEL COVERS BY

CAUTION:

UNSCREWING.

To reduce the risk of electric shock, do not remove the

The mains plug of the power supply cord shall

covers. No user serviceable parts inside.

remain readily operable.

Refer servicing to qualified service personnel.

The AC receptacle (mains socket outlet) shall

be installed near the equipment and shall be

easily accessible. To completely disconnect this

WARNING:

equipment from the AC mains, disconnect the

power cord plug from the AC receptacle.

This equipment must be earthed.

To ensure safe operation, the three-pin plug must

be inserted only into a standard three-pin power

point which is effectively earthed through the

CAUTION:

normal household wiring.

In order to maintain adequate ventilation, do not

Extension cords used with the equipment must

install or place this unit in a bookcase, built-in

have three cores and be correctly wired to

cabinet or any other confined space. To prevent

provide connection to the earth. Wrongly wired

risk of electric shock or fire hazard due to

extension cords are a major cause of fatalities.

overheating, ensure that curtains and any other

The fact that the equipment operates

materials do not obstruct the ventilation.

satisfactorily does not imply that the power point

is earthed or that the installation is completely

safe. For your safety, if you are in any doubt about

CAUTION:

the effective earthing of the power point, please

To reduce the risk of fire or electric shock and

consult a qualified electrician.

annoying interference, use the recommended

accessories only.

WARNING:

• To reduce the risk of fire or electric shock, do

CAUTION:

not expose this equipment to rain or moisture.

Operating

• To reduce the risk of fire or electric shock, keep

Check the installation at least once a year.

Instructions

this equipment away from all liquids. Use and

An improper installation could cause the unit to

store only in locations which are not exposed

fall off resulting in personal injury.

to the risk of dripping or splashing liquids, and

do not place any liquid containers on top of the

equipment.

Before use

indicates safety information.

EEE Yönetmeliğine Uygundur.

EEE Complies with Directive of Turkey.

25

Read this first!

(For AW-HE120WE, AW-HE120KE)

(continued)

EMC NOTICE FOR THE PURCHASER/USER OF THE APPARATUS

1. Applicable standards and operating environment

The apparatus is compliant with:

• standards EN55103-1 and EN55103-2 2009, and

• electromagnetic environments E4.

2. Pre-requisite conditions to achieving compliance with the above standards

<1> Peripheral equipment to be connected to the apparatus and special connecting cables

• The purchaser/user is urged to use only equipment which has been recommended by us as peripheral equipment

to be connected to the apparatus.

• The purchaser/user is urged to use only the connecting cables described below.

<2> For the connecting cables, use shielded cables which suit the intended purpose of the apparatus.

• Video signal connecting cables

Use double shielded coaxial cables, which are designed for 75-ohm type high-frequency applications, for SDI

(Serial Digital Interface).

Coaxial cables, which are designed for 75-ohm type high-frequency applications, are recommended for analog

video signals.

• Audio signal connecting cables

If your apparatus supports AES/EBU serial digital audio signals, use cables designed for AES/EBU.

Use shielded cables, which provide quality performance for high-frequency transmission applications, for analog

audio signals.

• Other connecting cables (IEEE1394, USB)

Use double shielded cables, which provide quality performance for high-frequency applications, as connecting

cables.

• When connecting to the DVI signal terminal, use a cable with a ferrite core.

• If your apparatus is supplied with ferrite core(s), they must be attached on cable(s) following instructions in this

manual.

3. Performance level

The performance level of the apparatus is equivalent to or better than the performance level required by these standards.

However, the apparatus may be adversely affected by interference if it is being used in an EMC environment, such as an

area where strong electromagnetic fields are generated (by the presence of signal transmission towers, cellular phones,

etc.). In order to minimize the adverse effects of the interference on the apparatus in cases like this, it is recommended

that the following steps be taken with the apparatus being affected and with its operating environment:

1. Place the apparatus at a distance from the source of the interference.

2. Change the direction of the apparatus.

3. Change the connection method used for the apparatus.

4. Connect the apparatus to another power outlet where the power is not shared by any other appliances.

26

Оглавление

Топ 10 инструкций

Другие инструкции

Assistant AH-1978 Assistant AH-1978 Severin TO 2030 Severin TO 2030 Festool CTH 48 E-LE-AC CLEANTEX Festool CTH 48 E-LE-AC CLEANTEX Levenhuk 2L NG Microscope Levenhuk 2L NG Microscope