Planet VIP-157: Voice communication samples

Voice communication samples: Planet VIP-157

Voice communication samples

There are several ways to make calls to desired destination in

ATA. In this section, we’ll lead you step by step to establish

your rst voice communication via keypad and web browsers

operations.

ATA to ATA connection via IP address

Assume there are two ATAs in the network the IP address are

192.168.0.1, 192.168.0.2

Analog telephone sets are connected to the phone (RJ-11) port

of ATAs respectively

1-10

192.168.0.1 192.168.0.2

1 9 2 * 1 6 8 * 0 * 2 #

Operation steps:

1. Pick up the telephone set on ATA A.

2. Press the keypad: 192*168*0*2# shall be able to connect to

the ATA B.

3. Then the phone in 192.168.0.2 should ring. Please repeat

the same dialing steps on ATA B to establish the rst voice

communication from ATA A

(Peer-to-Peer mode) VIP-157S Port 1 to Port 2

communications

Supposing you have one VIP-157S connects to two telephones,

just pick up phone 1 and dial ‘192*168*0*1**5062’, phone

2 will ring.

Analog telephone sets are connected to the phone (RJ-11) ports

of VIP-157S respectively

1-11

1001 1002

192.168.0.1

1 9 2 * 1 6 8 * 0 * 1 * * 5 0 6 2 #

Operation steps:

a) Pick up the telephone set on VIP-157S port 1, and you

should be able to hear the dial-tone

b) Press the keypad: 192*168*0*1**5062# shall be able to

connect to the VIP-157S port 2

c) Then the telephone set in VIP-157S port 2 should ring.

Please repeat the same dialing steps on port 2 to establish

the rst voice communication from VIP-157S

1-12

Hint

In default machine operation, the VIP-157 is

VoIP mode. If you want to make a PSTN phone

call, press the “0*” key to switch to PSTN

mode.

If the IP address of the remote calling party is

known, you may directly make calls via its IP

address and end with a “#”.

If the ATAs are installed behind a NAT/

firewall/IP sharing device for Peer-to-Peer VoIP

application, please make sure the NAT device

support SIP applications, and suitable settings

should be applied to the NAT device to enable

the SIP communications before making calls

[VIP-157S] in PLANET ATA series products,

to connect to remote ATA, press the keypad

in the following sequence to connect to the

remote VIP-157S port 2:

[remote ATA IP address]**5062,

for example: 192*168*0*2**5062

Voice communication via SIP proxy server

Registration /

Registration /

Authentication

Authentication

SIP Server IP Address:

192.168.0.50

VIP-156 IP Address:

VIP-156 IP Address:

192.168.0.1

192.168.0.2

Line Number: 1001

Line Number: 2002

Device congurations on the ATA:

STEP 1:

Log in SIP proxy Server and create two testing accounts/

password: 1001/123 (for ATA A), and 1002/123 (for ATA B)

for the voice calls.

STEP 2:

Please log in ATA via web browser, browse to the SIP setting

menu and select the Domain Service cong menu. In the

setting page, please insert the account/password information

obtained from your service provider, and then the sample

conguration screen is shown below:

STEP 3:

Repeat the same conguration steps on ATA B, and check the

machine registration status, make sure the registrations are

completed.

1-13

Test the scenario:

To verify the VoIP communication, please

1. Pick up the telephone on ATA A

2. Press the keypad: 2002 shall be able to connect to the ATA B

3. Then the telephone set in ATA B should ring. Please repeat

the same dialing steps on ATA B to establish the rst voice

communication from ATA A

1-14