Planet VIP-157: Preparation before beginning administration on SIP Analog Telephone Adapter

Preparation before beginning administration on SIP Analog Telephone Adapter: Planet VIP-157

Preparation before beginning

administration on SIP Analog Telephone

Adapter

Physical Interfaces

RJ-45 connector, to maintain the existing

1

PC

network structure, connected directly to the PC

through straight CAT-5 cable

RJ-45 connector, for Internet access, connected

2

LAN

directly to Switch/Hub through straight CAT-5

cable.

3

12V DC 12V DC Power input outlet

1-3

Note

1. Use proper AC adapter for the ATA, improper

power supply will damage device permanently.

2. For VIP-156PE, please connect IEEE802.3af

standard compliant power injector onto the LAN

interface for power resource. At the same time,

either PoE or AC adapter can be deployed at

one time.

Administration Interface

The ATA provides GUI (Web based, Graphical User Interface)

for machine management and. keypad administration is also

available for simple conguration.

Web conguration access:

To start ATA web conguration, you must have one of these web

browsers installed on computer for management

Microsoft Internet Explorer 4.01 or higher with Java support

Default IP address of ATA is 192.168.0.1. Please execute web

browser, and insert http://192.168.0.1 in the address bar of

your web browser to logon ATA web conguration page.

VIP-156/VIP-157 will prompt for logon username/password,

please enter: root / null (no password) to continue machine

administration.

1-4

Note

In order to connect machine for administration,

please locate your PC in the same network

segment (192.168.0.x) of the ATA. If you’re not

familiar with TCP/IP, please refer to related chapter

on user’s manual CD or consult your network

administrator for proper network configurations.

Network Interface quick congurations

Execute your web browser, and insert the IP address (default:

192.168.0.1) of VIP in the adddress bar. After logging

on machine with username/password (default: root / no

password), browse to “Network” “Network settings

conguration menu:

Parameter Description

LAN IP address of the

Default:

IP address

ATA

192.168.0.1

Default:

Mask LAN mask of the ATA

255.255.255.0

Default:

Default Gateway Gateway of the ATA

192.168.0.254

The Domain Name

Default:

DNS

Server IP address

168.95.192.1

1-5

Connection Type Data required.

The ISP will assign IP Address, and

Fixed IP

related information.

In most circumstances, it is no need to

DHCP client

congure the DHCP settings.

The ISP will assign PPPoE username /

PPPoE

password for Internet access.

After conrming the modication you’ve done, please click

on the Submit button to apply settings and browse to “Save

& Reboot” menu to reboot machine to make the settings

effective.

Save Change to Flash Memory

Most of the modication on ATA will take effective after

modications, but it is just temporary stored on RAM only, it

will disappear after your reboot or power off the VoIP Phone

Adapter, to save the parameters into Flash ROM and let it take

effective forever, please remember to press the Save & Reboot

button after you modify the parameters.

Keypad congurations

The ATA series phone adapters support telephone keypad

congurations, please connect analog telephone set and refer to

the following table for machine network congurations.

1-6

Menu

Machine

Parameter(s) Notes:

Choice

operation

Set DHCP

ATA will change

#111#

None

client

to DHCP Client

DHCP will be

Use the *

#112xxx*

disabled and

Setup Static

(star) key when

xxx*xxx*

system will

IP Address

entering a

xxx#

change to the

decimal point.

Static IP type.

Use the *

#113xxx*

Set Network

(star) key when

Must set Static

xxx*xxx*

Mask

entering a

IP rst.

xxx#

decimal point.

Use the *

#114xxx*

Set Gateway

(star) key when

Must set Static

xxx*xxx*

IP Address

entering a

IP rst.

xxx#

decimal point.

Use the *

#115xxx*

Set Primary

(star) key when

Must set Static

xxx*xxx*

DNS Server

entering a

IP rst.

xxx#

decimal point.

Enable auto-

For PLANET IPX-

#136#

None

cong mode

2000 IP PBX

Disable

For PLANET IPX-

#137#

auto-cong

None

2000 IP PBX

mode

1-7

Must unlock the

protect function

#190# Unlock None

before set up

network settings

via keypad.

The system will

be locked and

#191# Lock None

can’t set up

network settings

via keypad.

The system

#195# Reboot None

will reboot

automatically.

The system

will be reset to

Factory

#198#

None

factory default

Reset

value and reboot

automatically.

To switch

0*

None VIP-157 only

PSTN mode

Following keypad commands can be used to display the network

settings enabled on ATA via voice prompt.

1-8

IVR Menu

Machine

Notes:

Choice

operation

IVR will announce the

#120# Check IP Address

current IP address of the

ATA.

IVR will announce if

Check network

#121#

DHCP in enabled or

connection Type

disabled.

Check the Phone

IVR will announce current

#122#

Number

enabled VoIP number.

IVR will announce the

Check Network

#123#

current network mask of

Mask

the ATA.

IVR will announce the

Check Gateway

#124#

current gateway IP

IP Address

address of the ATA.

Check Primary

IVR will announce the

#125#

DNS Server

current setting in the

Setting

Primary DNS eld.

IVR will announce the

Check Firmware

#128#

version of the rmware

Version

running on the ATA.

1-9

Hint

Please contact your Internet service provider to

obtain the Internet access type, and select the

proper network settings in ATA to establish the

network connections.