Mr Handsfree Blue Eagle II: MAKING AND ANSWERING / ENDING CALLSMAKING AND ANSWERING / ENDING CALLS

GB – 4

Note:

• 

When an attempt to pair to more than two devices is made, the oldest paired device is removed from the memory.

• 

When any of the paired devices is in the range of 10 meters and power is on, the Blue Eagle II will automatically initiate 

a connection with the last device it was connected to. If not, press MFB once to quickly start the connection. If you 

want to connect to another device that has been paired with your Blue Eagle II, you should disconnect the connected 

device and initiate the connection from another mobile phone (Please refer to the manual of your mobile phone). 

Some mobile phones support only Headset Bluetooth

®

 profile operation. To switch the Blue Eagle II to the Headset profile, press 

and hold 

MFB

 on the Blue Eagle II during power on of the carkit. This will be confirmed by a tone. 

 Now the Blue Eagle II is started 

in the special Headset Bluetooth

®

 profile operation. From now on, you can follow the normal operation to pair and connect your 

mobile phone and the carkit. 

 To switch your Blue Eagle II back in the normal mode, please repeat this operation.

Note:

If your mobile phone and the Blue Eagle II connect to each other with Headset profile, the following functions may not 

work: LCD, Voice dialing, and Last number redial.

MAKING AND ANSWERING / ENDING CALLS MAKING AND ANSWERING / ENDING CALLS

Note:

Before using the Blue Eagle II make sure that:

• 

The carkit is paired and connected to your phone.

• The 

phone’s 

Bluetooth

®

 feature is on; see your phone’s user’s manual.

Once the Blue Eagle II is successfully paired with your mobile phone, you can use it to make and receive calls. The Blue Eagle II 

can be used with voice dialing if your mobile phone supports this feature.

MAKING CALLS

Using your mobile phone:

Enter and dial the number on the mobile phone as you normally do. 

Using voice dialing:

In Standby mode, press 

MFB

. 

 You will hear a tone that indicates that you can say the voice tag. 

 Say the name of the person 

you want to call. 

 The Blue Eagle II will repeat the voice tag and the corresponding number will be dialed.

m_BlueEagleII_GB.indd   4

m_BlueEagleII_GB.indd   4

10.10.2006   14:44:07

10.10.2006   14:44:07

GB – 5

Note:

• 

Some phones don’t send the audible tone to indicate that you can say the voice tag.

• 

For more details on voice dialing, please refer to your phone’s user’s manual.

ANSWERING A CALL

When a call is received, the Blue Eagle II rings and the display shows the caller’s number.

Press 

MFB

 to answer the call OR answer the call with your mobile phone.

Note:

If the call is answered by pressing MFB, the display shows the duration of the call.

AUTOMATIC ANSWER

If the Automatic answer function is set on your phone, the phone automatically answers the incoming call after some rings.

ENDING A CALL

Press 

MFB

 once OR end the call with your mobile phone.

REDIAL

In Standby mode, press and hold 

MFB

 for 3 seconds. 

 The last dialed number will be dialed out automatically.

OR

Dial the last dialed number with your mobile phone.

SECOND INCOMING CALL

If you get a second call during a conversation, you will hear a “Beep” tone and you have the following two options:

1. Press 

MFB

 once to receive the second call and reject the current call.

2. Press 

MFB

 twice to receive the second call and put the current call on hold.

You can press 

MFB

 twice to switch between the 2 calls.

Note:

Some phones don’t support this feature via Bluetooth

®

.

m_BlueEagleII_GB.indd   5

m_BlueEagleII_GB.indd   5

10.10.2006   14:44:07

10.10.2006   14:44:07