Konica Minolta bizhub PRO 2000P: инструкция

Раздел: Офисная Техника

Тип: Полиграфическое Оборудование

Инструкция к Полиграфическому Оборудованию Konica Minolta bizhub PRO 2000P

Safety Information

Precautions for Installation and Use

Safety Information

This information contains detailed instructions on the operation and maintenance of this machine. To achieve

optimum utility of this device, all operators should carefully read and follow the instructions in this manual.

Please read the following section before connecting the machine to the supply. It contains important

information related to user safety and prevention of equipment problems.

Please keep this manual in a handy place near the machine.

Make sure you observe all of the precautions appear in each section of this manual.

Note: Some parts of the contents of this section may not correspond with the purchased product.

Warning and Precaution Symbols

The following indicators are used on the warning labels or in user’s guides to categorize the level of safety

warnings.

WARNING Ignoring this warning could cause serious injury or even death.

CAUTION Ignoring this caution could cause injury or damage to property.

Safety Symbols

A triangle indicates a danger against which you should take precaution.

This symbol warns of burns.

A diagonal line indicates a prohibited course of action.

This symbol indicates that the device must not be disassembled.

A solid circle indicates an imperative course of action.

This symbol indicates that the devise must be unplugged.

2

Safety Information

Disassemble and modification

WARNING

Do not attempt to remove the covers and panels which have been fixed to

the product. Some products internally have a high-voltage part or a laser

beam source inside that could cause an electric shock or blindness.

Do not configure this product yourself, otherwise a fire, electric shock, or

breakdown could result. If the product employs a laser, the laser beam

source could cause blindness.

Power cord

WARNING

Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull

on, or damage the power cord. Use of a damaged power cord (such as

having exposed core wire, broken wire, etc.) could result in a fire or

breakdown.

Should any of these conditions be found, immediately turn OFF the power

switch, unplug the power cord from the power outlet, and then call your

authorized service representative.

3

Safety Information

Power source

WARNING

Use only the power source of a specified voltage. Failure to do so could

result in a fire or electric shock.

Connect the power plug directly into a wall outlet having the same

configuration as the plug. Use of an adapter leads the product being

subject to inadequate power supply (voltage, current capacity,

grounding), and may result in fire or electric shock. If proper wall outlet is

not available, the customer shall ask qualified electrician for the

installation.

Do not use a multiple outlet adapter nor an extension cord basically. Use

of an adapter or an extension cord could cause a fire or electrical shock.

Contact your authorized service representative if an extension cord is

required.

Consult your authorized service representative before connecting other

equipment on the same wall outlet. Overload could result in a fire.

CAUTION

The wall outlet must be near the equipment and easily accessible.

Otherwise you may not pull out the power plug when an emergency

occurs.

Power plug

WARNING

Do not handle the power plug with a wet hand, as an electric shock could

result.

Insert the power plug completely into the power outlet. Failure to do so

could result in a fire or electric shock.

CAUTION

Do not tug the power cord when unplugging. Pulling on the power cord

could damage the cord, resulting in a fire or electric shock.

Remove the power plug from the outlet more than one time a year and

clean the area between its prongs. Any accumulation of dust may cause a

fire.

4

Safety Information

Grounding

WARNING

Connect the power cord to a power outlet that is equipped with a ground

terminal.

Installation

WARNING

Do not place a flower vase or other container that contains water, or metal

clips or other small metallic objects on this product. Spilled water or

metallic objects dropped inside the product could result in a fire, electric

shock, or breakdown.

Should a piece of metal, water, or any other similar foreign matter get

inside the product, immediately turn OFF the power switch, disconnect

the power plug from the power outlet, and then call your authorized

service representative.

CAUTION

For installing this product, use a secure base to fix it. If the unit moves or

falls, it may cause personal injury.

Do not place this product in a dusty place, or a site exposed to soot or

steam, near a kitchen table, bath, or a humidifier. A fire, electric shock, or

breakdown could result.

Do not place this product on an unstable or tilted bench, or in a location

subject to high levels of vibration and shock. It could drop or fall, causing

personal injury or mechanical breakdown.

Do not let any object plug the ventilation holes of this product. Heat could

accumulate inside the product, resulting in a fire or malfunction.

Do not use flammable sprays, liquids, or gases near this product, as a fire

could result.

5

Safety Information

Ventilation

CAUTION

Always use this product in a well ventilated location. Operating the

product in a poorly ventilated room for an extended period of time could

injure your health. Ventilate the room at regular intervals.

Actions in response to troubles

WARNING

Do not keep using this product, if it becomes abnormally hot or emits

smoke, unusual odor, or noise. Immediately turn OFF the power switch,

disconnect the power plug from the power outlet, and then call your

authorized service representative. If you keep on using it as is, a fire or

electric shock could result.

Do not keep using this product, if it has been dropped or its cover has

been damaged. Immediately turn OFF the power switch, disconnect the

power plug from the power outlet, and then call your authorized service

representative. If you keep on using it as is, a fire or electric shock could

result.

CAUTION

The inside of this product has areas subject to high temperature, which

may cause burns.

When checking the inside of the unit for malfunctions such as a paper

misfeed, do not touch the areas (around the fusing unit, etc.) indicated by

a “Caution HOT” labels.

Consumables

WARNING

Do not throw toner containers or toner itself into a fire. The hot toner may

scatter and cause burns or other damage.

CAUTION

Do not leave toner containers or photoconductor drum in a place within

easy reach of children. Licking or ingesting any of these things could

damage their health.

Do not store toner units and photoconductor drum units near a floppy

disk or watch that are susceptible to magnetism. They could cause

malfunction to these products.

6

Safety Information

When moving the machine

CAUTION

Before moving this product, be sure to disconnect the power plug from

the power outlet or other cables coming from external devices. Failure to

do so could damage the cord or cable, resulting in a fire, electric shock, or

breakdown.

Whenever moving this product, be sure to hold it by the locations

specified in the user’s guide or other documents. If the unit falls it may

cause severe personal injury. The product may also be damaged or

malfunction.

Before successive holidays

CAUTION

Unplug the product when you will not use the product for long periods of

time.

7

Regulation Notices

m For Users in countries not subject to Class B regulations

WARNING

This is a Class A product. In a domestic environment this product may cause ratio interference in which case

the user may be required to take adequate measures.

This devise must be used with a shielded network cable. The use of non-shielded cables is likely to result in

interference with radio communications and is prohibited under CISPR rules and local rules.

m Ozone Release

Locate the Machine in a Well-Ventilated Room

A negligible amount of ozone is generated during normal operation of this machine. An unpleasant odor may,

however, be created in poorly ventilated rooms during extensive machine operations. For a comfortable,

healthy and safe operating environment, it is recommended that the room be well ventilated.

Placer l'appareil dans une piece largement ventilee

Une quantite d'ozone negligable est degagee pendant le fonctionnement de l'appareil quand celui-ci est

utilise normalement. Cependant, une odeur desagreable peut etre ressentie dans les pieces dont l'aeration

est insuffisante et lorsque une utilisation prolongee de l'appareil est effectuee. Pour avoir la certitude de

travailler dans un environnment reunissant des conditions de confort, sante et de securite, il est preferable

de bien aerer la piece ou se trouve l'appareil.

m USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY DEVICES (For U.S.A. Users)

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the interference at his own expense.

WARNING: The design and production of this unit conform to FCC regulations, and any changes or

modifications must be registered with the FCC and are subject to FCC control. Any changes made by the

purchaser or user without first contacting the manufacturer will be subject to penalty under FCC regulations.

m INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE 4) (For Canada Users)

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numerique de la classe A est conforme a la norme NMB-003 du Canada.

8

Аннотации для Полиграфического Оборудования Konica Minolta bizhub PRO 2000P в формате PDF