Konica Minolta PagePro 1350EN: инструкция

3 

English 

■

Safety Information 

This section contains detailed instructions on the operation and maintenance of your printer. To achieve optimum printer 

performance, carefully read and follow these instructions.  

Read the following section before plugging in the printer. It contains important information related to user safety and prevention 

of equipment problems. 

Keep this manual near the printer for easy reference. 

Note:

Some information in this manual may not apply to your specific printer. 

■

Warning and Caution Symbols

Both this manual and the printer use labels and symbols to help prevent injury to the operator and others around the printer, 

and damage to property. The meaning of these labels and symbols is as follows: 

WARNING

Ignoring this warning could cause serious injury or even death.

CAUTION

Ignoring this caution could cause injury or damage to property. 

●

Meaning of Symbols

 indicates a danger against which you should take precaution. 

The symbol shown to the left warns against possible electrical shock.

 indicates a prohibited course of action. 

The symbol shown to the left warns against dismantling the device.  

 indicates an imperative course of action. 

The symbol shown to the left indicates you must unplug the device. 

 WARNING

•

Do not attempt to remove the covers and panels which have been fixed to the printer. Some printers 

have a high-voltage part or a laser beam source inside that could cause an electrical shock or 

blindness. 

•

Do not modify the printer, as a fire, electrical shock, or breakdown could result. If the printer employs a 

laser, the laser beam source could cause blindness. 

•

Use only the power cord supplied in the package. If a power cord is not supplied, use only the power 

cord and plug that are specified in the user documentation. Failure to use this cord could result in a fire 

or electrical shock. 

•

Use the power cord supplied in the package only for this printer and NEVER use it for any other 

product. Failure to observe this precaution could result in a fire or electrical shock.   

•

Use only the specified power source voltage. Failure to do that could result in a fire or electrical shock. 

•

Do not use a multiple outlet adapter to connect any other products. Use of a power outlet for more 

than the marked current value could result in a fire or electrical shock. 

•

Do not use an extension cord in principle. Use of an extension cord could cause a fire or electrical 

shock. Contact your authorized service provider if an extension cord is required. 

•

Do not scratch, rub, place a heavy object on, heat, twist, bend, pull on, or damage the power cord. Use 

of a damaged power cord (exposed core wire, broken wire, etc.) could result in a fire or breakdown. 

Should any of these conditions be found, immediately turn OFF and unplug the printer, and then call 

your authorized service provider. 

WARNING

Do not unplug and plug in the power cord with wet hands, as an electrical shock could result. 

Plug the power cord all the way into the power outlet. Failure to do this could result in a fire or 

electrical shock. 

Connect the power cord to an electrical outlet that is equipped with a grounding terminal. 

Do not place metal clips

,

 any other small metallic objects, or a container containing liquid on the 

printer. Liquid and metallic objects dropped inside the printer could result in a fire, electrical shock, or 

breakdown. 

Should liquid, a piece of metal, or any other foreign matter fall inside the printer, immediately turn OFF 

and unplug the printer, and then call your authorized service provider. 

•

Do not use your printer if it becomes inordinately hot, emits smoke or an unusual odor, or makes an 

unusual noise. Immediately turn OFF and unplug the printer, and then call your authorized service 

provider. If you continue using it, a fire or electrical shock could result. 

•

Do not use this printer if it has been dropped or its cover damaged. Immediately turn OFF and unplug 

the printer, and then call your authorized service provider. If you continue using it, a fire or electrical 

shock could result. 

Do not burn toner cartridges or toner. The hot toner may scatter and cause burns or other damage. 

CAUTION

•

Do not expose the printer to dust, soot, or steam, or place it near a kitchen table, bath, or humidifier. A 

fire, electrical shock, or breakdown could result. 

•

Do not place the printer on an unstable or tilted table, or in a location subject to a lot of vibration and 

shock. It could fall, causing personal injury or mechanical breakdown. 

After installing this product, place it on a sturdy base. It the printer moves or falls, it may cause 

personal injury. 

The inside of the printer has areas subject to high temperature, which may cause burns. 

When checking the inside of the printer for malfunctions such as media jams, do not touch the 

locations (around the fusing unit, etc.) labeled “Caution HOT.” 

•

Do not obstruct the printer’s ventilation grilles. Heat could accumulate inside the printer, resulting in a 

fire or malfunction. 

•

Do not use flammable sprays, liquids, or gases near the printer, as a fire could result. 

•

Do not pull on the power cord when unplugging it. Pulling on the power cord could damage it, resulting 

in a fire or electrical shock. 

•

Do not place any objects around the power plug, as it may be difficult to unplug the power cord if an 

emergency occurs. 

4 

CAUTION

•

Do not store toner cartridges and PC drum units near computer disks or watches that are susceptible 

to magnetism. They could cause these products to malfunction. 

•

Do not leave toner cartridges or PC drum units within reach of children. Ingesting toner could be 

harmful to your health. 

•

Whenever moving the printer, be sure to disconnect the power cord and other cables. Failure to do this 

could damage the cord or cable, resulting in a fire, electrical shock, or breakdown. 

•

Unplug the printer if you will not be using it for a long period of time. 

•

When moving the printer, always hold it in the locations specified in the user documentation. If the 

printer falls, it may cause severe personal injury and/or printer damage. 

•

Use the printer only in a well-ventilated location. Operating the printer in a poorly ventilated room for 

an extended period of time could be harmful to your health. Ventilate the room at regular intervals. 

•

Remove the power cord from the outlet more than once a year and clean between the plug terminals. 

Dust that accumulates between the plug terminals may cause a fire. 

■

Regulation Notices 

●

Laser Safety 

This product employs a Class 3B laser diode having maximum power of 

1

5 mW and wavelength of 770 - 800 nm. 

This product is certified as a Class 

1

 laser product. Since the laser beam is concealed by protective housings, the product 

does not emit hazardous laser radiation as long as the product is operated according to the instructions in this manual. 

●

Internal Laser Radiation 

Maximum average radiation power: 36.903 µW at the laser aperture of the print head unit. 

Wavelength: 770-800 nm 

CAUTION: 

Use of controls, adjustments, or performance of procedures other than those specified in this manual may result in 

hazardous radiation exposure. 

●

Interference-Causing Equipment Standard (ICES-003 ISSUE 4) 

- For Canadian Users 

This Class B digital apparatus complies with Canadian ICES-003.  

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 

This device must be used with a shielded interface cable. The use of non-shielded cables is likely to result in interference with 

radio communications and is prohibited under ICES-003. 

●

FCC Part 

1

5 - Radio Frequency Devices 

- For United States Users 

FCC: Declaration of Conformity

Product Type

Laser Printer

Product Name

PagePro 

1

350EN

Options Memory 

(Max. 

1

28 MB) 

This device complies with Part 

1

5 of the FCC Rules 

Operation is subject to the following two conditions: 

•

This device may not cause harmful interference, and this device must accept any interference received, 

including interference that may cause undesired operation.

NOTE:  

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 

1

5 of 

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference 

to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged 

to try to correct the interface by one or more of the following measures: 

•

Reorient or relocate the receiving antenna. 

•

Increase the separation between the equipment and receiver. 

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

•

Consult the dealer or an experienced radio/TV technician for help. 

WARNING: 

The design and production of this unit conform to FCC regulations, and any changes or modifications must be 

registered with the FCC and are subject to FCC control. Any changes made by the purchaser or user without first 

contacting the manufacturer will be subject to penalty under FCC regulations. 

This device must be used with a shielded interface cable. 

The use of non-shielded cables is likely to result in interference with radio communications and is prohibited under 

FCC rules.

●

For European Users

This product complies with the following EU directives: 

89/336/EEC, 73/23/EEC and 93/68/EEC 

This declaration is valid for the areas of the European Union (EU) or EFTA only. 

This device must be used with a shielded interface cable.  The use of non-shielded cables is likely to result in 

interference with radio communications and is prohibited under 89/336/EEC rules.

●

Ozone Release 

During print operation, a small quantity of ozone is released. This amount is not large enough to harm anyone 

adversely. However, be sure the room where the machine is being used has adequate ventilation, especially if you are 

printing a high volume of materials, or if the machine is being used continuously over a long period. 

●

 Dégagement d’ozone 

En cours de fonctionnement, l’imprimante ne dégage qu'une faible quantité d’ozone, insuffisante pour provoquer un 

quelconque malaise personnel. Veillez cependant à ce que la pièce dans laquelle la machine est installée soit  aérée 

de manière adéquate, notamment si vous imprimez de gros volumes ou si l'imprimante est longtemps utilisée en 

continu. 

●

Electromagnetic Interference 

This product must be used with a shielded interface cable. 

The use of non-shield cables is likely to result in interference with radio communications and is prohibited under 

CISPR 22 and local rules. 

 (4

1

36-956

1

-00A) 

Laser aperture of the print head unit.