Konica Minolta PagePro 1350EN: CAUTION

4 

CAUTION

•

Do not store toner cartridges and PC drum units near computer disks or watches that are susceptible 

to magnetism. They could cause these products to malfunction. 

•

Do not leave toner cartridges or PC drum units within reach of children. Ingesting toner could be 

harmful to your health. 

•

Whenever moving the printer, be sure to disconnect the power cord and other cables. Failure to do this 

could damage the cord or cable, resulting in a fire, electrical shock, or breakdown. 

•

Unplug the printer if you will not be using it for a long period of time. 

•

When moving the printer, always hold it in the locations specified in the user documentation. If the 

printer falls, it may cause severe personal injury and/or printer damage. 

•

Use the printer only in a well-ventilated location. Operating the printer in a poorly ventilated room for 

an extended period of time could be harmful to your health. Ventilate the room at regular intervals. 

•

Remove the power cord from the outlet more than once a year and clean between the plug terminals. 

Dust that accumulates between the plug terminals may cause a fire. 

■

Regulation Notices 

●

Laser Safety 

This product employs a Class 3B laser diode having maximum power of 

1

5 mW and wavelength of 770 - 800 nm. 

This product is certified as a Class 

1

 laser product. Since the laser beam is concealed by protective housings, the product 

does not emit hazardous laser radiation as long as the product is operated according to the instructions in this manual. 

●

Internal Laser Radiation 

Maximum average radiation power: 36.903 µW at the laser aperture of the print head unit. 

Wavelength: 770-800 nm 

CAUTION: 

Use of controls, adjustments, or performance of procedures other than those specified in this manual may result in 

hazardous radiation exposure. 

●

Interference-Causing Equipment Standard (ICES-003 ISSUE 4) 

- For Canadian Users 

This Class B digital apparatus complies with Canadian ICES-003.  

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 

This device must be used with a shielded interface cable. The use of non-shielded cables is likely to result in interference with 

radio communications and is prohibited under ICES-003. 

●

FCC Part 

1

5 - Radio Frequency Devices 

- For United States Users 

FCC: Declaration of Conformity

Product Type

Laser Printer

Product Name

PagePro 

1

350EN

Options Memory 

(Max. 

1

28 MB) 

This device complies with Part 

1

5 of the FCC Rules 

Operation is subject to the following two conditions: 

•

This device may not cause harmful interference, and this device must accept any interference received, 

including interference that may cause undesired operation.

NOTE:  

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 

1

5 of 

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference 

to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged 

to try to correct the interface by one or more of the following measures: 

•

Reorient or relocate the receiving antenna. 

•

Increase the separation between the equipment and receiver. 

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

•

Consult the dealer or an experienced radio/TV technician for help. 

WARNING: 

The design and production of this unit conform to FCC regulations, and any changes or modifications must be 

registered with the FCC and are subject to FCC control. Any changes made by the purchaser or user without first 

contacting the manufacturer will be subject to penalty under FCC regulations. 

This device must be used with a shielded interface cable. 

The use of non-shielded cables is likely to result in interference with radio communications and is prohibited under 

FCC rules.

●

For European Users

This product complies with the following EU directives: 

89/336/EEC, 73/23/EEC and 93/68/EEC 

This declaration is valid for the areas of the European Union (EU) or EFTA only. 

This device must be used with a shielded interface cable.  The use of non-shielded cables is likely to result in 

interference with radio communications and is prohibited under 89/336/EEC rules.

●

Ozone Release 

During print operation, a small quantity of ozone is released. This amount is not large enough to harm anyone 

adversely. However, be sure the room where the machine is being used has adequate ventilation, especially if you are 

printing a high volume of materials, or if the machine is being used continuously over a long period. 

●

 Dégagement d’ozone 

En cours de fonctionnement, l’imprimante ne dégage qu'une faible quantité d’ozone, insuffisante pour provoquer un 

quelconque malaise personnel. Veillez cependant à ce que la pièce dans laquelle la machine est installée soit  aérée 

de manière adéquate, notamment si vous imprimez de gros volumes ou si l'imprimante est longtemps utilisée en 

continu. 

●

Electromagnetic Interference 

This product must be used with a shielded interface cable. 

The use of non-shield cables is likely to result in interference with radio communications and is prohibited under 

CISPR 22 and local rules. 

 (4

1

36-956

1

-00A) 

Laser aperture of the print head unit.