Konica Minolta PagePro 1350E: инструкция

KONICA MINOLTA

™

PagePro

1350E

1800783-075B

4136-7762-02

The essentials of imaging

printer.konicaminolta.com

English

■Safety Information

WARNING

This section contains detailed instructions on the operation and maintenance of your printer. To achieve optimum printer

performance, carefully read and follow these instructions.

Do not unplug and plug in the power cord with wet hands, as an electrical shock could result.

Read the following section before plugging in the printer. It contains important information related to user safety and prevention

of equipment problems.

Plug the power cord all the way into the power outlet. Failure to do this could result in a fire or

Keep this manual near the printer for easy reference.

electrical shock.

Note: Some information in this manual may not apply to your specific printer.

Connect the power cord to an electrical outlet that is equipped with a grounding terminal.

■ Warning and Caution Symbols

Do not place metal clips, any other small metallic objects, or a container containing liquid on the

Both this manual and the printer use labels and symbols to help prevent injury to the operator and others around the printer,

printer. Liquid and metallic objects dropped inside the printer could result in a fire, electrical shock, or

and damage to property. The meaning of these labels and symbols is as follows:

breakdown.

Should liquid, a piece of metal, or any other foreign matter fall inside the printer, immediately turn OFF

Ignoring this warning could cause serious injury or even death.

and unplug the printer, and then call your authorized service provider.

WARNING

• Do not use your printer if it becomes inordinately hot, emits smoke or an unusual odor, or makes an

Ignoring this caution could cause injury or damage to property.

CAUTION

unusual noise. Immediately turn OFF and unplug the printer, and then call your authorized service

provider. If you continue using it, a fire or electrical shock could result.

• Do not use this printer if it has been dropped or its cover damaged. Immediately turn OFF and unplug

●Meaning of Symbols

the printer, and then call your authorized service provider. If you continue using it, a fire or electrical

shock could result.

indicates a danger against which you should take precaution.

Do not burn toner cartridges or toner. The hot toner may scatter and cause burns or other damage.

The symbol shown to the left warns against possible electrical shock.

indicates a prohibited course of action.

The symbol shown to the left warns against dismantling the device.

indicates an imperative course of action.

CAUTION

The symbol shown to the left indicates you must unplug the device.

• Do not expose the printer to dust, soot, or steam, or place it near a kitchen table, bath, or humidifier. A

fire, electrical shock, or breakdown could result.

• Do not place the printer on an unstable or tilted table, or in a location subject to a lot of vibration and

WARNING

shock. It could fall, causing personal injury or mechanical breakdown.

• Do not attempt to remove the covers and panels which have been fixed to the printer. Some printers

After installing this product, place it on a sturdy base. It the printer moves or falls, it may cause

have a high-voltage part or a laser beam source inside that could cause an electrical shock or

personal injury.

blindness.

The inside of the printer has areas subject to high temperature, which may cause burns.

• Do not modify the printer, as a fire, electrical shock, or breakdown could result. If the printer employs a

When checking the inside of the printer for malfunctions such as media jams, do not touch the

laser, the laser beam source could cause blindness.

locations (around the fusing unit, etc.) labeled “Caution HOT.”

• Use only the power cord supplied in the package. If a power cord is not supplied, use only the power

• Do not obstruct the printer’s ventilation grilles. Heat could accumulate inside the printer, resulting in a

cord and plug that are specified in the user documentation. Failure to use this cord could result in a fire

fire or malfunction.

or electrical shock.

• Do not use flammable sprays, liquids, or gases near the printer, as a fire could result.

• Use the power cord supplied in the package only for this printer and NEVER use it for any other

product. Failure to observe this precaution could result in a fire or electrical shock.

• Do not pull on the power cord when unplugging it. Pulling on the power cord could damage it, resulting

• Use only the specified power source voltage. Failure to do that could result in a fire or electrical shock.

in a fire or electrical shock.

• Do not place any objects around the power plug, as it may be difficult to unplug the power cord if an

• Do not use a multiple outlet adapter to connect any other products. Use of a power outlet for more

emergency occurs.

than the marked current value could result in a fire or electrical shock.

• Do not use an extension cord in principle. Use of an extension cord could cause a fire or electrical

shock. Contact your authorized service provider if an extension cord is required.

• Do not scratch, rub, place a heavy object on, heat, twist, bend, pull on, or damage the power cord. Use

of a damaged power cord (exposed core wire, broken wire, etc.) could result in a fire or breakdown.

Should any of these conditions be found, immediately turn OFF and unplug the printer, and then call

your authorized service provider.

1

●FCC Part 15 - Radio Frequency Devices

- For United States Users

CAUTION

FCC: Declaration of Conformity

• Do not store toner cartridges and PC drum units near computer disks or watches that are susceptible

to magnetism. They could cause these products to malfunction.

Product Type Laser Printer

• Do not leave toner cartridges or PC drum units within reach of children. Ingesting toner could be

Product Name PagePro 1350E

harmful to your health.

Options Memory (Max. 128 MB)

• Whenever moving the printer, be sure to disconnect the power cord and other cables. Failure to do this

could damage the cord or cable, resulting in a fire, electrical shock, or breakdown.

This device complies with Part 15 of the FCC Rules

Operation is subject to the following two conditions:

• Unplug the printer if you will not be using it for a long period of time.

• This device may not cause harmful interference, and this device must accept any interference received,

• When moving the printer, always hold it in the locations specified in the user documentation. If the

including interference that may cause undesired operation.

printer falls, it may cause severe personal injury and/or printer damage.

• Use the printer only in a well-ventilated location. Operating the printer in a poorly ventilated room for

NOTE:

an extended period of time could be harmful to your health. Ventilate the room at regular intervals.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

• Remove the power cord from the outlet more than once a year and clean between the plug terminals.

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

Dust that accumulates between the plug terminals may cause a fire.

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference

■Regulation Notices

to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged

●Laser Safety

to try to correct the interface by one or more of the following measures:

This product employs a Class 3B laser diode having maximum power of 15 mW and wavelength of 770 - 800 nm.

• Reorient or relocate the receiving antenna.

This product is certified as a Class 1 laser product. Since the laser beam is concealed by protective housings, the product

• Increase the separation between the equipment and receiver.

does not emit hazardous laser radiation as long as the product is operated according to the instructions in this manual.

●Internal Laser Radiation

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Maximum average radiation power: 36.903 µW at the laser aperture of the print head unit.

• Consult the dealer or an experienced radio/TV technician for help.

Wavelength: 770-800 nm

WARNING:

The design and production of this unit conform to FCC regulations, and any changes or modifications must be

registered with the FCC and are subject to FCC control. Any changes made by the purchaser or user without first

contacting the manufacturer will be subject to penalty under FCC regulations.

Laser aperture of the print head unit.

This device must be used with a shielded parallel cable and shielded USB interface cable.

The use of non-shielded cables is likely to result in interference with radio communications and is prohibited under

FCC rules.

●For European Users

This product complies with the following EU directives:

89/336/EEC, 73/23/EEC and 93/68/EEC

This declaration is valid for the areas of the European Union (EU) or EFTA only.

This device must be used with a shielded parallel cable and shielded USB interface cable. The use of non-shielded

cables is likely to result in interference with radio communications and is prohibited under 89/336/EEC rules.

●Ozone Release

During print operation, a small quantity of ozone is released. This amount is not large enough to harm anyone

adversely. However, be sure the room where the machine is being used has adequate ventilation, especially if you are

printing a high volume of materials, or if the machine is being used continuously over a long period.

● Dégagement d’ozone

En cours de fonctionnement, l’imprimante ne dégage qu'une faible quantité d’ozone, insuffisante pour provoquer un

quelconque malaise personnel. Veillez cependant à ce que la pièce dans laquelle la machine est installée soit aérée

CAUTION:

de manière adéquate, notamment si vous imprimez de gros volumes ou si l'imprimante est longtemps utilisée en

Use of controls, adjustments, or performance of procedures other than those specified in this manual may result in

continu.

hazardous radiation exposure.

●Electromagnetic Interference

●Interference-Causing Equipment Standard (ICES-003 ISSUE 4)

This product must be used with a shielded parallel cable and shielded USB interface cable.

- For Canadian Users

The use of non-shield cables is likely to result in interference with radio communications and is prohibited under

This Class B digital apparatus complies with Canadian ICES-003.

CISPR 22 and local rules.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

This device must be used with a shielded parallel cable and shielded USB interface cable. The use of non-shielded cables is

●Notification for California Customers in United States

likely to result in interference with radio communications and is prohibited under ICES-003.

This product uses a CR Lithium Battery which contains perchlorate material.

This perchlorate warning applies to perchlorate-containing lithium batteries sold or distributed in California, USA.

"Perchlorate Material - Special handling may apply, See www.dtsc.ca.gov/ hazardouswaste/perchlorate."

(4136-7763-02A)

2