Eizo FORIS FX2431: No-Picture Problem

English

17

No-Picture Problem

If no picture is displayed on the monitor even after the following remedial action is taken, contact your local dealer.

1. Check the Power indicator.

Symptom Status Possible cause and remedy

No picture Power indicator does not light

• Check whether the power cord is correctly

up.

connected.

• Check whether the main power switch is on.

• Press

on the remote control (or on the

monitor).

Power indicator lights blue. Check whether the device is connected

correctly.

(PC Input / HDMI (PC Signal) Input)

Set each adjusting value in [Brightness],

1

[Contrast] and [Gain]

*

to higher level.

(VIDEO Input / HDMI (Video Signal) Input)

Check whether the power of the connected

device is turned on.

Power indicator lights orange. (PC Input / HDMI (PC Signal) Input)

• Press a key on the keyboard or click the

mouse.

• Turn on the PC.

1

*

For the setting of the brightness, contrast and gain, please refer to the User’s Manual on the CD-ROM.

2. Check the error message that remains on the screen.

(PC Input / HDMI (PC Signal) Input)

Symptom Status Possible cause and remedy

Example:

The message left shows that

Change the mode appropriately using the

the input signal is out of the

graphics board’s utility software. Refer to the

specied frequency range.

manual of the graphics board for details.

*

Current input signal can be

checked in [Information]

menu. (The signal frequency

that is out of the range is

displayed in magenta.)

3. Check [Information] of the Setting menu.

(Press on the remote control, choose [Information] with

or

, and then press .)

Symptom Status Possible cause and remedy

Example:

The message left shows that

• Check whether the device is connected

the signal is not input from the

correctly.

device or the signal from the

• Check whether the power of the connected

device is outside the

device is turned on.

specication.

• Conrm the output signal format by referring

to the instruction manual of the connected

device.

“Signal Error” is displayed.

English

Copyright© 2009 EIZO NANAO CORPORATION All rights reserved.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,

electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.

EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information condential

unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said information.

Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO

monitor specications are subject to change without notice.

Apple and Macintosh are registered trademarks of Apple Inc.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

VGA is a registered trademark of International Business Machines Corporation.

Windows, Windows Vista and Xbox 360 are registered trademarks of Microsoft Corporation in the United States and other countries.

VESA is a registered trademark or a trademark of Video Electronics Standards Association in the United States and other countries.

EIZO and ScreenManager are registered trademarks of EIZO NANAO CORPORATION in Japan and other countries.

FORIS is a trademark of EIZO NANAO CORPORATION.

18

English

Deutsch

Setup Manual

Installationshandbuch

Important: Please read this Setup Manual and the User’s Manual stored on the CD-

Wichtig:

Lesen Sie die VORSICHTSMASSNAHMEN, dieses Handbuch zur

ROM carefully to familiarize yourself with safe and effective usage. Please

Einrichtung und das Benutzerhandbuch (auf der CD-ROM) aufmerksam

retain this manual for future reference.

durch, um sich mit der sicheren und efzienten Bedienung vertraut zu

machen. Bewahren Sie dieses Handbuch zum späteren Nachschlagen auf.