Yamaha NS-9900: REMOVING THE FRONT COVER SPECIFICATIONS

English

REMOVING THE FRONT COVER

SPECIFICATIONS

The front cover is fastened to the enclosure at six points and

Type .................................. 3-way bass reflex speaker system

can be removed if desired. To remove the cover, hold on to

Magnetic shielding type

both sides and slowly pull straight away from the speaker. To

Driver........................................... 16 cm cone type woofer x 2

reattach, line up the six holes on the inner surface of the cover

13 cm cone type midrange

with the six corresponding pegs on the speaker and push

2.5 cm hard dome type tweeter

gently.

Impedance ........................................................................ 6 Ω

Frequency response .......................45 Hz to 35 kHz (

–10 dB)

to 100 kHz (

–30 dB)

Rated input power ...........................................................50 W

Maximum input power ...................................................200 W

Sensitivity ....................................................... 91 dB/2.83 V/m

Crossover frequency .........................................800 Hz, 3 kHz

Dimensions (W x H x D)

Speaker cabinet..................................220 x 1157 x 335 mm

Including stands..................................310 x 1170 x 371 mm

Weight ......................................................................... 25.5 kg

• Specifications are subject to change without notice due

to product improvements.

• Care should be taken not to exceed the input power

values noted above.

Taking care of the speaker

When you wipe this unit, do not use chemical solvents (ex.

alcohol or thinner etc.); this might damage the finish. Use a

clean, dry cloth. For heavy dirt, dampen a soft cloth in the

water, wring it out, and then clean this unit up with the cloth.

This symbol mark is according to the EU directive

Note

2002/96/EC.

This symbol mark means that electrical and electronic

When the cover is removed, take care not to touch the

equipment, at their end-of-life, should be disposed of

speaker units with your hands or to exert excessive force

separately from your household waste.

with tools.

Please act according to your local rules and do not dispose

of your old products with your normal household waste.

5 En