Maxwell MW-3013 OG: ENGLISH

ENGLISH

• Fill the water tank (10) till the MAX mark

supply handle (3) to the middle position

(12).

“steam supply off”.

• Put the iron on the base (8).

• Remove the power plug from the outlet.

• Insert the power plug into the outlet.

• Set the iron vertically and allow it to cool

• Set the temperature regulator (11) to the

completely.

MAX. temperature: “•••” the (9) indica-

• Open the water tank lid (2), turn over the

tor will light up.

iron and drain any remaining water from

• When the sole temperature (13) reaches

the water tank (10).

the desired temperature value, the (9) in-

• Close the lid (2).

dicator will go out, you can start cleaning

• Store the iron vertically in a dry cool

of the iron chamber.

place, out of the reach of children.

• Unplug the iron, set the temperature reg-

ulator (11) to the «MIN» position.

TECHNICAL CHARACTERISTICS

• Pull the plug out of the socket.

Power requirements: 220 -240V ~ 50 Hz

• Hold the iron above the sink horizontally;

Power consumption: 1200-1400 W

turn the constant steam supply handle

(3) anti clockwise until bumping “self

Specifications subject to change without

clean mode”.

prior notice.

• Boiling water together with scale will be

throwing out from the openings in the

Service life of appliance - 3 years.

iron sole (13).

• Slightly sway the iron back and forth, un-

GUARANTEE

til water goes out of the water tank (11).

Details regarding guarantee conditions can

• Place the iron on the base (8) and let it

cool down completely.

be obtained from the dealer from whom

• When the sole (13) cools down com-

the appliance was purchased. The bill of

pletely, wipe it with a dry cloth.

sale or receipt must be produced when

• Before you take the iron for storing,

making any claim under the terms of this

make sure that there is no water in the

guarantee.

water tank (10) and that the iron sole (13)

is completely dry.

This product conforms to the

EMC-Requirements as laid down

CARE AND CLEANING

by the Council Directive 89/336/

• Before cleaning the iron, make sure that

EEC and to the Law Voltage

it is turned off and has cooled complete-

Regulation (73/23 EEC)

ly.

• Wipe the iron’s outer surface with a damp

cloth and then wipe dry.

• Sediment on the iron sole can be re-

moved with a cloth soaked in vinegar so-

lution.

• After removing sediment, polish the sole

with a dry cloth.

• Do not use abrasive substances to clean

the sole and body of the iron.

• Avoid touching the iron sole with sharp

metal objects.

STORAGE

• Turn the temperature handle (11) anti-

clockwise till MIN position, set the steam

11

MW-3013.indd 11MW-3013.indd 11 17.03.2010 17:33:3617.03.2010 17:33:36