Maxwell MW-3003 VT: инструкция

MW-3003.indd 1MW-3003.indd 1 26.05.2009 10:21:4326.05.2009 10:21:43

2

MW-3003.indd 2MW-3003.indd 2 26.05.2009 10:21:4526.05.2009 10:21:45

ENGLISH

STEAM IRON

children or infirm persons are near

the unit.

DESCRIPTION

• Never leave the operating unit unat-

1. Water spray nozzle

tended.

2. Water tank lid

• Always unplug the unit if you do not

3. Steam supply regulator

use it.

4. Spray button

• In order to avoid electric shock do not

5. Additional steam release button

immerse the unit into water or other

6. Handle

liquids.

7. Power cord protection

• Do not fill the water tank with scent-

8. Base

ed liquids, vinegar, starch solution,

9. Heating element on/off indication

descaling reagents, chemical agents

10. Water tank

etc.

11. Temperature regulator

• Avoid contact with hot surfaces or

12. Maximal water level indication

outgoing steam of the iron in order to

13. Iron sole

avoid getting burns.

• Provide that the power cord is not

SAFETY MEASURES

hanging over the edge of the ironing

Before using the unit, please read

board and make sure that it does not

the instructions carefully and pay

touch heated surfaces.

attention to the illustrations.

• To unplug the unit always take it by

• Before switching on the unit, make

the plug, do not pull by the power

sure that your home electricity supply

cord.

corresponds to the voltage of current

• Before taking the unit away for keep-

specified on the unit.

ing, pour out the remaining water and

• Power cord is equipped with a euro

let the unit cool down.

plug; insert it into the socket, with se-

• Pour out water only after you have

cure grounding.

unplugged the unit.

• In order to avoid risk of fire do not use

• Do not use the unit if the plug or the

adapters while connecting the appli-

power cord is damaged or if there are

ance to the outlet.

other damages in the unit.

• In order to avoid overloading of the

• In order to avoid electric shock do

power network do not switch on sev-

not repair the unit yourself. If there

eral appliances with high power con-

are some damages in the unit apply

sumption simultaneously.

to the authorized service center.

• Use the unit only for the intended

purposes.

BEFORE USAGE

• Use the iron only on the ironing

• Take out the iron from the package

board.

and remove the protective cartoon

• Place the iron on a flat stable sur-

covering from the iron sole (13).

face.

• Make sure that the electrical supply

• Always unplug the unit while filling the

voltage corresponds to the iron's op-

water tank with water.

erating voltage.

• While operating the unit, provide that

the water tank lid is firmly closed

Note:

• Close supervision is necessary when

The iron's heating element is bro-

3

3

MW-3003.indd 3MW-3003.indd 3 26.05.2009 10:21:4526.05.2009 10:21:45

ENGLISH

ken in during the first use; it is nor-

temperature indicated on the tag be-

mal for a small amount of smoke to

fore ironing.

be released.

• If the tag does not list the recom-

mended ironing temperature, but

you know the type of fabric, then use

CHOICE OF WATER

the following table to determine the

• To fill the water tank use regular tap

proper temperature.

water. If the water is hard then it is

recommended to mix it with distilled

Signs Fabric type/temperature

water at a ratio of 1:1, if the water is

Synthetics, nylon, acryl, polyester

•

very hard, mix it with distilled water at

(low temperature)

••

Silk/wool (medium temperature)

a ratio of 1:2 or use only distilled wa-

•••

Cotton/flax (high temperature)

ter.

• This table is only for smooth materi-

Note:

als. Fabrics of other types (crimped,

Do not fill the water tank (10) with

raised etc.) are best ironed at low

scented liquids, vinegar, starch so-

temperature.

lutions, descaling reagents, chemi-

• First sort items by ironing tempera-

cal substances etc.

ture: wool with wool, cotton with cot-

ton etc.

FILLING THE WATER TANK

• The iron heats up faster than is cools

Make sure that the iron is disconnected

down. For this reason it is recom-

from electrical power before filling it

mended to begin ironing at low tem-

with water.

perature (for instance synthetic fab-

• Set the steam release regulator (3) to

rics). After that, move to higher tem-

the low position of steam vapor OFF.

perature ironing. Cotton and linens

• Open the water tank lid (2).

should be ironed last.

• Fill it with water. Close the lid (2).

• If an item is made from a mix of fab-

rics, then the iron should be set for

Note:

the fabric with the lowest ironing (for

• Do not fill it with water above

instance if an item is made from 60%

MAX. indication.

polyester and 40% cotton, it should

• If you need to refill the water

be ironed at the temperature used for

tank during ironing, turn off the

ironing polyester “•”).

iron and unplug the power cord

• If you cannot define the fabric the

from the outlet.

item is made from, find a place on it

• After you finish ironing, open

that is hidden while wearing and, on

the water tank lid (2) and drain the

practice select the ironing tempera-

remaining water.

ture (always start at the lowest and

gradually raise it until you get the de-

IRONING TEMPERATURE

sired result.)

Before operating test the heated iron

• Corduroy and other fabrics that start

on the old cloth to be sure that the iron

glossy quickly should be ironed

sole (13) and the water tank (10) are

strictly in one direction (along the

clean.

lines) with slight pressure.

• Always check the recommended iron

4

MW-3003.indd 4MW-3003.indd 4 26.05.2009 10:21:4526.05.2009 10:21:45

ENGLISH

• To avoid appearance of glossy spots

STEAM IRONING

on the synthetic and silk fabrics, iron

For steam ironing set the temperature

them back-side.

regulator to «•••» or «МАХ».

• Place the iron on the base (8).

SETTING THE IRONING

• Insert the power plug into the outlet.

TEMPERATURE

• Make sure that there is enough water

• Place the iron on the base (8).

in the water tank (10).

• Insert the power plug into the outlet.

• Set the temperature regulator (13)

• Set the temperature regulator (11)

to the required ironing temperature:

to the required ironing temperature:

“•••” or “max”, the (9) indicator will

“•”, “••”, “•••” or “max” (depend-

light up.

ing on the type of fabric), the (9) indi-

• When the sole temperature (13)

cator will light up.

reaches the desired temperature val-

• When the sole temperature (13)

ue, the (9) indicator will go out, you

reaches the desired temperature val-

can start ironing.

ue, the (9) indicator will go out, you

• Turn the steam supply regulator (3) to

can start ironing.

set the intensity of steaming, steam

will start outgoing from the openings

Note: While steam ironing set the

of the sole (13).

temperature «•••» or «МАХ».

• After you finish ironing set the (11)

regulator to the “min” position and

WATER SPRAYER

the steam supply regulator (3) to the

• You can dampen the fabric by press-

low position.

ing the spray button (4) several

• Pull the plug out of the socket and let

times.

the iron cool down completely.

• Make sure that there is enough water

in the water tank (10).

ATTENTION!

If during the operation steam is not

IRONING

constantly supplied, check whether the

• Place the iron on the base (8).

temperature regulator (11) is set prop-

• Insert the power plug into the outlet.

erly.

• Set the temperature regulator (11)

to the required ironing temperature:

ADDITIONAL STEAM RELEASE

“•”, “••”, “•••” or “max” (depend-

Additional steam release function is

ing on the type of fabric), the (9) indi-

useful when ironing folds and can only

cator will light up.

be used at high ironing temperatures

• When the sole temperature (13)

(when the iron temperature regulator

reaches the desired temperature val-

(11) is set to “•••” or “max”).

ue, the (9) indicator will go out, you

can start ironing.

• When the additional steam release

• After you finish ironing set the (11)

button (5) is pressed, steam will be

regulator to the “min” position.

vigorously released from the open-

• Pull the plug out of the socket and let

ings in the iron sole.

the iron cool down completely.

Note: In order to avoid leakage of

water from steam openings, press

5

MW-3003.indd 5MW-3003.indd 5 26.05.2009 10:21:4526.05.2009 10:21:45

ENGLISH

the additional steam supply button

TECHNICAL CHARACTERISTICS

(5) with 4-5 sec. interval.

Power requirements: 230 V ~ 50/60 Hz

Power consumption: 2200 W

AUTO-RELEASE FUNCTION

If the iron is about 30 seconds in the

Specifications subject to change with-

horizontal position or about 8 minutes

out prior notice.

in the vertical position it will switch off

automatically. To switch on the iron,

MINIMUM SERVICE LIFE - 3 YEARS

just start ironing.

GUARANTEE

Note: After switching off of the iron the

Details regarding guarantee conditions

preset temperature of the iron sole will be

can be obtained from the dealer from

set in some time depending on the position

whom the appliance was purchased.

of the temperature regulator (11).

The bill of sale or receipt must be pro-

duced when making any claim under

CARE AND CLEANING

the terms of this guarantee.

• Before cleaning the iron, make sure

that it is turned off and has cooled

This product conforms to the

completely.

EMC-Requirements as laid down

• Wipe the iron's outer surface with a

by the Council Directive 89/336/

damp cloth and then wipe dry.

EEC and to the Law Voltage

• Sediment on the iron sole can be re-

Regulation (73/23 EEC)

moved with a cloth soaked in vinegar-

water solution.

• After removing sediment, polish the

sole with a dry cloth.

• Do not use abrasive substances to

clean the sole and body of the iron.

• Avoid touching the iron sole with

sharp metal objects.

STORAGE

• Turn the temperature regulator (11)

anticlockwise till MIN position, set

the steam release regulator (3) to the

low position - steam release OFF po-

sition.

• Remove the power plug from the out-

let.

• Open the water tank lid (2), turn over

the iron and drain any remaining wa-

ter from the water tank (10).

• Close the lid (2).

• Set the iron vertically and allow it to

cool completely.

• Store the iron vertically.

6

MW-3003.indd 6MW-3003.indd 6 26.05.2009 10:21:4526.05.2009 10:21:45