Intimus 26 CC3: GB
GB: Intimus 26 CC3
<< The machine may not be operated by more
<< Danger of injury! Keep all loose
than one person at any given time!
articles of clothing, ties, jewelery,
The intimus 26SC2/CC3 // 32SC2/CC3 data
The machine was designed for safe operation
long hair or other loose objects
shredder is designed for shredding general printed
away from opening!
credit cards.
<< Danger of injury!
This machine should only be used for
<< During the shredding process no other
opening!
shredding paper and credit cards and
work may be performed on the machine
for shredding CDs and DVDs!
Any attempt to shred other types of data
<< In case of danger switch the machine off
medium may result in damage to the
with the mains switch, or with the emer-
machine (e.g. destruction of the cutting
<< The machine is not a toy, and is not suitable
gency switch, or unplug the machine!
mechanism etc.).
for use by children!
The overall technical safety concept of
<< Always unplug the machine from the
this machine (dimensions, feed openings,
mains power supply before opening the
emergency shutdown devices etc.) does not
machine!
- Place plastic sack into the receptacle.
provide for any guarantee regarding hazard-
Repairs may only be performed by trained
- Plug in the machine (for instructions for the
free operation by children.
personnel!
The socket outlet shall be installed
near the equipment and shall be easily
accessible!
Only operate the machine in enclosed
rooms at temperatures between 10°C
b)
and 25°C!
for approx. two secs., the cutting
When the machine is plugged in for
mechanism runs forwards continually
connection to the mains, the machine is in
and materials to be shredded can be fed
into the machine. At the same time the
lights up.
9 = Control display
This button has three functions:
a)
cutting mechanism runs backwards. At the
Lights up when the motor has been
overloaded and has switched off. The
mode, the machine is switched to
machine cannot be started during the
lights up.
cooling down phase of the motor.
The cutting mechanism only runs
10 = Control display
backwards as long as the button is held
display lights simultaneously.
(touch function).
Lights up when the user interlock is
a)
activated. To activate the user interlock,
The shredding operation starts as soon
approx. 3 secs. in Ready mode, the
as material is fed into one of the two feed
slots.
11 = Control display
period of approx. 30 mins., it switches
Lights if too much material is fed into the
Lights up when the receptacle is full and
cutting mechanism. The cutting mechanism
must be replaced. At the same time the
b)
halts, then runs one step in reverse and
machine is automatically switched off.
stops. The motor switches off.
mechanism is running, the mechanism
7 = Control display
is switched off and stops.
Lights up when the cutting mechanism of
This button has two functions:
a)
cutting mechanism runs forwards for a
few seconds, e.g. to remove remaining
8 = Control display
The shredder may not be used as a
material from the cutting mechanism.
step ladder or as a seat. Danger of
Lights up when the receptacle is not placed
falling due to breakage!
properly under the machine. The machine
is switched off automatically when the
receptacle is removed and cannot be
started if the receptacle is not placed
properly under the machine.
26SC2
26CC3
32SC2
32CC3
3
5
6
9
13
7
10
1
8
11
12
2
4
89894 8 03/13
GB
INITIATION
OPERATION
OPERATION
5
OPERATING THE MACHINE
When the machine is delivered, the function
machine must be manually switched to forwards
By keeping the function button (2) pressed for
of the user interlock is switched off.
running (press and hold the forwards button (3)
For information on activating the user interlock,
for approx. 2 secs.).
user interlock is switched on, the locking function
function), the shredding process can be stopped
of the user interlock is simultaneously activated.
at any time. To continue, press and hold the
continue depending on the actual programmed
forwards button (3) for approx. 2 secs.
deactivate the user interlock, please refer to
mode as follows:
OPERATING THE MASCHINE
user interlock is switched on, it
of the function button (2)
must be deactivated again when the machine
is switched on again ( OPERATING THE
To enter programming mode, the machine must
loaded.
MASCHINE).
OPERATING THE
MASCHINE).
While switching on the machine subject to
Never feed the shredder with a quantity
Proceed as follows:
the procedure described below, the user interlock
of material exceeding the maximum
- Pull out receptacle (14) until the control display
will be temporarily deactivated.
indicated. Refer to the TECHNICAL
(8) lights up.
DATA section!
- Press and hold forwards button (3) for approx.
Should the machine become
(10) lights up.
overloaded, follow the instructions under
You are now in programming mode.
“MATERIAL JAM IN MACHINE” under
(4) pressed simultaneously for approx. 2 secs.
“MALFUNCTIONS”.
programming time window of approx. 20 secs.,
of the function button (2)
mode.
not
A two compartment receptacle ensures that waste
Programming sequence
of the function button (2)
(14) and a separate collection tray (15) for the
- Press forwards button (3) and backwards button
display (10) goes out.
(4) simultaneously and keep them pressed until
The machine can be loaded.
The ll level of the collection tray
the control displays (10), (2) and (4)
When the machine is switched on again
(15) is not displayed by the control
display!
- Push receptacle in again.
interlock must be deactivated again.
When shredding large quantities of CDs/
Programming is complete. Programming mode is
DVDs (approx. 25 per load), please
switched off automatically. The control displays
check the ll level of the collection
Feed paper into the cutting mechanism through
(10), (2) and
tray occasionally and empty the tray
the paper feed slot (12) (Fig. 3).
5 secs to indicate completion of programming.
separately as required.
Feed data carriers
Programming sequence
into the cutting mechanism individually into the
to switch user interlock
separate safety feed slot (13) (Fig. 3).
switches off. The control display (11) lights up.
The machine automatically switches to forwards
- Press forwards button (3) and backwards button
Proceed as follows:
running, draws the material in and automatically
(4) simultaneously and keep them pressed until
- Pull the receptacle (14) with the collection
switches off after shredding.
the control displays (10) and
tray (15) out of the lower housing. The control
When shredding papers, do not shred
- Push receptacle in again.
display (8) lights up and the control display
CD/DVD at the same time, and vice
Programming is complete. Programming mode is
(11) goes out.
versa!
switched off automatically. The control displays
- Dispose of the contents of the containers
(10) and
separately.
to indicate completion of programming.
- Push the empty receptacle with the collection
tray back into the lower housing. The control
display
in one of the feed slots, the control display
(6) now lights up.
remaining material is shredded and the display
(6) goes out.
The machine only runs when the receptacle
is fully pushed in!
26SC2
26CC3
32SC2
32CC3
15
3
6
9
7
10
8
11
14
2
4
89894 8 03/13
GB
OPERATION
6
- The remaining material is now automatically fed into
(Auto-reverse function)
the cutting mechanism again and shredded.
- The control display
points:
machine reacts as follows:
of the forwards button (3) is permanently lit.
- is the mains plug
- When the material has run through, continue
- is the machine in
in reverse (material is released) and stops. The
shredding with correct quantities.
motor is switched off.
- has the user interlock
- The control display (6) lights up.
forwards and backwards alternately until the material
Proceed as follows:
has completely run through and has been shredded.
- is the receptacle
Paper jam in paper feed slot (12)
Wait each time until the motor stops
- is the receptacle
- Remove released paper from the feed slot (12).
before switching direction!
and shreds the remaining paper in the cutting
- is there a material jam
mechanism.
- The control display
of the forwards button (3) is permanently lit.
display
rocker switch (1).
After a cooling down period of approx. 25-40 minutes
If none of the above applies, please contact your
- Remove released material.
(depending on the model and room temperature), you
Take care when removing material as
can switch the machine on again.
sharp edges may cause injury!
26SC2
26CC3
32SC2
32CC3
16
89894 8 03/13
GB
The cutting mechanism now automatically begins
the cleaning cycle (forwards operation/backwards
guide (for example after a paper jam) it is possible
operation) and then switches off. The machine is
that the machine will not turn off, due to the broken
after a certain operating time.
light barrier.
(7) lights up, proceed
To remove these paper strips and also to clean the
as follows:
photocell, pass another sheet of paper through the
Pull out receptacle (14), take oil receptacle (16) (Fig.
feed slot, or switch the machine to reverse and wipe
6) out of the holder in the lower cabinet and push
receptacle in again.
of the function button
it into the cutting mechanism through the paper feed
slot (12).
The paper is drawn in and the oil thus gets into the
switched on, it must be deactivated again when the
cutting mechanism.
OPERATING THE
MACHINE
- Pull out receptacle (14) until the control display
(8) lights up.
Dispose of the machine in an environmentally
- The control displays (7) and
friendly fashion at the end of its useful service
- Press backwards button (4) and keep pressed until
life. Do not dispose of any of the parts
the control display (7) goes out.
included in the machine or its packaging with
- Push receptacle in again.
household waste.
TECHNICAL DATA
Intermittent operation
Dimensions Weight
intimus 26SC2
intimus 26CC3
intimus 32SC2
intimus 32CC3
*
Pre-fusing (slow-blow): 220-240V = 10 amps / 120V = 15 amps
SPECIAL ACCESSORIES
supply voltage/frequency · current consumption · power
Description
intimus 26SC2
Plastic bag, 300x300x700x0.018 mm 99925
intimus 26CC3
Lubricant, 110 ml bottle 88035
intimus 32SC2
intimus 32CC3
For orders of special accessories and spare parts,
please contact your dealer.
7
