Imetec BELLISSIMA CREATIVITY STYLE CREATOR B6 100: Ask the installation technician for advice. ATTENTION! Do not use this appliance near bath tubs, wash basins or other water containers! Never place the appliance in water!

EN

• press the

button (7). The LED display (3) goes on;

• select the desired temperature between 150°C and

230°C, depending on the type of hair and the desired

effect; the temperature can be varied at any time by

pressing + or - (8);

• after having selected the desired temperature, the

buttons lock can be activated by pressing the

button

(7) twice and quickly. This function prevents accidental

temperature changes while using the plate. The activation

of the buttons lock is signalled by the LED (4) going on;

the lock can be disconnected by pressing the button

(7) twice once again;

• the LED display (3) ashes until the plates reach the set

temperature.

Once the temperature is reached, the LED display (3)

remains on;

• take a thin lock of hair, the same width of the plate and

place it between the two plates;

• with one hand keep the lock of hair tensioned and with

the other slide the plate closed from the roots down to

the points.

In order to discover the numerous methods and effects

that can be achieved using the straightener, consult the

Easy Styling Guide.

• once hair styling is completed, switch-off the appliance

by keeping the

button (7) pressed and disconnect the

appliance from the socket.

Note: It is possible that steam develops during

straightening; this is excess humidity in the hair that

evaporates.

ADJUSTING THE TEMPERATURE

The hair straightener has an electronic temperature

adjustment system. This allows the plate temperature to be

adjusted according to the type of hair and the desired style.

150-160°C: recommended for thin hair

170-190°C: recommended for medium hair

200-230°C: recommended for thick hair

1414141414

141414

MI000525.indd 14 21/04/11 23.37

EN

It is recommended to start styling by setting it to the lowest

temperature and progressively increasing the temperature

according to the desired style.

IONIZER

The plate has an ionizer - a device that

reproduces ionization, which add shine and

brightness to the hair. The "static hair" effect is

also reduced.

ATTENTION! RISK OF SCALDING

During use, the external parts marked in Figure 1 reach high

temperatures. Be particularly careful not to place these parts

in contact with the skin or ngers while using the straightener.

Figure 1

Before applying or removing the shells (Figure 2) ensure the

plate is cold.

Figure 2

AUTOMATIC SWITCH-OFF

The straightener switches off automatically 1 hour after being

switched on.

1515151515

151515

MI000525.indd 15 21/04/11 23.37

EN

CLEANING

• Switch off the appliance by pressing the button (7) and

disconnecting the plug (6) from the socket

• Wait for the plates (10) to cool down

• Clean the surface of the plates (10), the heated bodywork

(2) and the handle with a soft, damp cloth.

Before re-using the appliance, ensure that all

cleaned parts are completely dry!

DISPOSAL

The packaging is made up of recyclable material.

Dispose of it in compliance with the environmental

protection standards.

Pursuant to European Standard 2002/96/EC, when the

appliance is no longer used, it must be disposed of at

the end of its use cycle in a compliant manner.

This regards recycling useful substances in the

appliance, which reduces the environmental impact.

For further information, contact the local disposal body

or the appliance dealer.

SERVICE AND WARRANTY

To request repairs or purchase spare parts, please contact

IMETEC’s authorised customer assistance service on the

Toll-Free Number below or via the website.

The appliance is covered by the manufacturer’s warranty.

For details, read the attached warranty sheet.

Failure to comply with the instructions for use and

maintenance provided in this manual will render the

manufacturer’s warranty null and void.

0311 (MMYY)

MI000525

Tel. +39.035.688.111 Fax +39.035.320.149

1616161616

161616

MI000525.indd 16 21/04/11 23.37

FR

NOTICE D’EMPLOI POUR

UTILISER LE FER À LISSER

Cher client, IMETEC vous remercie d’avoir acheté cet

appareil. Nous sommes certains que vous en apprécierez la

qualité et la abilité car il a été conçu et produit pour vous

satisfaire en tout et pour tout. Cette notice d’emploi a été

rédigée conformément à la norme européenne EN 62079.

ATTENTION! Instructions et

avertissements pour un emploi en

toute sécurité.

Avant d’utiliser le lisseur, lisez attentivement le mode

d’emploi et en particulier les consignes de sécurité,

en vous y conformant. Conservez-le avec la notice

d’illustration tout au long de la durée de vie de l’appareil,

  

      

également toute la documentation.

Si certaines parties du mode d’emploi ne vous sont pas

claires ou si vous avez des doutes de compréhension,





SOMMAIRE

Consignes de sécurité ..........................18

Description de l’appareil et de ses accessoires ......20

Conseils utiles .................................21

Utilisation .....................................21

Nettoyage .....................................24

Élimination ....................................24

Assistance et garantie ..........................24

1717171717171717

MI000525.indd 17 21/04/11 23.37