Maxwell MW-3011 G: ENGLISH

ENGLISH

Note: While steam ironing set the tem-

ATTENTION!

perature “•••” or MAX.

If during the operation steam is not con-

stantly supplied, check whether the tem-

WATER SPRAYER

perature regulator (11) is set properly and

• You can dampen the fabric by pressing

whether there is water in the reservoir.

the spray button (4) several times.

• Make sure that there is enough water in

ADDITIONAL STEAM RELEASE

the water tank (10).

Additional steam release function is useful

when ironing folds and can only be used at

IRONING

high ironing temperatures (when the iron

• Place the iron on the base (8).

temperature regulator (11) is set to “•••”

• Insert the power plug into the outlet.

or MAX).

• Set the temperature regulator (11) to the

• When the additional steam release but-

required ironing temperature: “•”, “••”,

ton (5) is pressed, steam will be vigor-

“•••”or “MAX” (depending on the type

ously released from the openings in the

of fabric), the (9) indicator will light up.

iron sole.

• When the sole temperature (13) reaches

the desired temperature value, the (9) in-

Note: In order to avoid leakage of water

dicator will go out, you can start ironing.

from steam openings, press the addi-

• After you finish ironing set the (11) regu-

tional steam supply button (5) with 45

lator to the “MIN” position.

sec. interval.

• Pull the plug out of the socket and let the

iron cool down completely.

VERTICAL STEAMING

For vertical steaming can be used only

STEAM IRONING

when the high temperature mode is used

For steam ironing set the temperature

(set the temperature regulator (11) to

regulator to steam using zone or “•••” or

«•••» or MAX).

MAX.

• Hold the iron vertically at the distance

• Place the iron on the base (8).

15-30 cm from the clothes press the ad-

• Insert the power plug into the outlet.

ditional steam release button (5) with 4-5

• Make sure that there is enough water in

seconds interval, steam will be released

the water tank (10).

from the openings in the iron sole (13).

• Set the temperature regulator (11) to the

required ironing temperature: to steam

Important information

using zone or “•••” or MAX (depending

• Vertical steaming is not recommended

on the type of fabric), the (9) indicator

for synthetic fabrics.

will light up.

• To avoid melting the fabric, do not touch

• When the sole temperature (13) reaches

the iron sole to the item while steaming.

the desired temperature value, the (9) in-

• Never steam iron clothing that is being

dicator will go out, you can start ironing.

worn as the steam temperature is very

• Switch on the constant steam supply,

high and it can cause burns. Use a coat-

setting the switch (3) in vertical position,

hanger or a stand.

steam will start outgoing from the open-

ings of the sole (13).

STEAM CHAMBER CLEANING

• After you finish ironing set the (11) regula-

To prolong lifetime of the iron we recom-

tor to the “MIN” position and the steam

mend cleaning the steam chamber, espe-

supply regulator (3) to the off position.

cially in the regions with “hard” water.

• Pull the plug out of the socket and let the

• Set the steam supply regulator (3) to the

iron cool down completely.

off position.

• Fill the water tank (10) till the MAX mark

(12).

10

MW-3011.indd 10MW-3011.indd 10 11.02.2010 16:27:1411.02.2010 16:27:14