Cambridge Audio Azur 640C: 540C/640C Compact disc player

540C/640C Compact disc player

INSTALLATION

Please take a moment to read these notes before installing your azur

If you do not intend to use this unit for a long period, switch it to standby

Compact Disc player, they will enable you to get the best performance

and unplug it from the mains socket.

and prolong the life of the product.

To clean the unit, wipe its case with a moist, lint-free cloth. Do not use

This unit may be installed on any sturdy, level surface. Since the power

any cleaning fluids containing alcohol, ammonia or abrasives. Do not

transformers generate a magnetic hum field of moderate strength, a

spray an aerosol at or near your CD player.

turntable should not be located nearby.

This product is not user serviceable, never attempt to repair,

The unit requires ventilation. Do not situate it on a rug or other soft

disassemble or reconstruct the unit if there seems to be a problem. A

surface and do not obstruct any air inlets or outlet grilles.

serious electric shock could result if this precautionary measure is

ignored. In the event of a problem or failure, please contact your dealer.

Do not place in an enclosed area such as a bookcase or in a cabinet.

This unit must not be exposed to dripping or splashing water or other

Important nnote

liquids. No objects filled with liquid, such as vases, shall be placed on

the unit. In the event, switch off immediately, disconnect from the mains

This unit has been designed to play Compact

supply and contact your dealer for advice.

Discs, Recordable CD's and Rewritable CD's bearing

the identification logo shown here. No other discs

Ensure that small objects do not fall through any ventilation grille. If this

can be used.

happens, switch off immediately, disconnect from the mains supply and

contact your dealer for advice.

Do not route the power cable so that it can be walked upon or damaged

by other items near it.

Like all audiophile electronic components, this unit will perform best

once it has warmed up. When using for the first time it is advisable that

it is left on, playing music, for at least 36 hours prior to critical listening.

For subsequent use, a warm up period of 10-15 minutes is

recommended for maximum enjoyment.

Do not plug your CD player directly into a power amplifier.

5

REAR PANEL CONNECTIONS FRONT PANEL CONTROLS

AC power ssocket

Standby/On

Once you have completed all connections to the amplifier, plug the AC

This control switches the unit from Standby mode to On.

Power Cable into an appropriate mains socket. Your Compact Disc player

is now ready for use.

Open/Close

Allows you to open and close the disc tray thus making it possible to load

Line ooutput

a disc. Pressing Play will also close the tray and start the CD.

Use good quality interconnect cables from these sockets to any line level

input on your amplifier.

Play/Pause

Plays the disc and pauses play.

Optical DDigital ooutput

Use this socket to connect to the input of a separate DAC or digital

recording machine. Use a high quality TOSLINK fibre optic interconnect

cable designed specifically for audio use.

Stop

Stops the CD playing.

Coaxial DDigital ooutput

This coaxial output is for input to a separate DAC or digital recording

Skip/Scan

machine. Use a high quality 75 ohm digital RCA interconnect cable for

Allows for skipping between tracks and also searching within tracks.

this connection (not one designed for normal audio use).

6