Cambridge Audio Azur 640C: 540C/640C Compact disc player

540C/640C Compact disc player

7

OPERATING INSTRUCTIONS

Loading aand uunloading ddiscs

Normal ddisc pplay

1. Press the Standby/On switch.

1. Switch on your amplifier and set its input selector to the correct

position. Adjust the volume control to a minimum.

2. Press the Open/Close button.

2. Press the On/Standby switch.

3. When the disc tray has opened fully, place a disc carefully in the tray

with the label side facing up.

3. Press the Open/Close button to open the disc tray, and load a disc.

4. To close the disc tray, press the Open/Close button again. When the

4. Press the Open/Close button again to close the tray. The CD player

tray with a correctly loaded disc is fully closed, the disc will start

will read the disc and enter standby mode. Alternatively pressing Play

turning automatically. After the CD player has read the disc it will be

will close the tray and start playing the disc.

ready to play. Pressing Play will also close the tray and start playing

5. Press the Play button. The disc will start playing from the beginning

the disc

of the first track. When the last track has finished playing, the CD

5. The disc tray can be opened at any time by pressing the Open/Close

player will return to standby mode.

button. Only remove the disc after the tray has fully opened.

6. To stop the disc at any point press the Stop button. Pressing the Play

Note

button while the disc is playing will pause the disc. When the disc is

paused the display will flash, play can be resumed by pressing the

Do not put anything except a Compact Disc into the tray, foreign objects

PLAY button again.

may damage the mechanism.

Do not force the tray by hand during the opening and closing operations.

Locating aa sspecific ttrack

To avoid dirt and dust entering the mechanism, keep the disc tray

1. Ensure that a disc is loaded and the player is in stopped mode.

closed.

2. Pressing the Skip/Scan Right button once will forward the CD by one

If the Compact Disc is seriously scratched or too dirty the player may not

track. Repeat as necessary.

be able to read it or play it.

3. Press Play. The disc will play to the end of the disc and then return to

Never load more than one disc into the disc tray at one time.

standby mode.

4. Pressing the Skip/Scan Left button will access the previous track.

During play, pressing reverse will firstly rewind the track playing.

Pressing again will then access the previous track.

8