Babyliss E836XE X-10: ENGLISH

months. Full autonomy of the

ENGLISH

unit will only be obtained after

three complete recharge cycles.

MULTI-PURPOSE TRIMMER

CHARGING THE UNIT

FOR HAIR, FACE AND BODY

1. Remove the trimmer and all

1. 32mm blades

the accessories from the base

Moveable blade:

and turn the base over. Open

- Exclusive three-dimensional

the security tongue, insert the

etching process: for an

power cord into the opening

exceptionally sharp cutting

intended for this, pushing it in

edge.

rmly and replace the security

- CMS (Chrome-Molybdenum-

tongue. Place the cord in the

Stainless Steel): ultra-

groove. Put the base back in

hardwearing and 100% stainless

place and connect it to the

steel blade.

mains. (Fig. 1)

Fixed Blade: Stainless steel

2. Place the trimmer (set to OFF)

2. 2 cutting guides (2-14mm

in the charging base and check

and 3-15mm) for hair and

that the charging indicator

beard

light is on.

3. 6-position precision guide

3. A full charge (16 hours) will

(from 0,5 to 3mm) for very

allow you 30 minutes of

short cuts

autonomous use.

4. Shaving head for body + 1

4. Before using the trimmer for

cutting guide (3mm) for a

the rst time, allow it to charge

quick and even shave of all the

for 16 hours.

parts of your body

5. Subsequent charges should

5. 18mm shaving head for face

also be 16 hours.

6. 7mm precision blade, to

create precisely contours and

USE ON THE MAINS

original designs

To use the trimmer on the mains,

7. Nose/ear accessory, to

plug the cord directly into the

eliminate unwanted nose and

unit.

ear hair

Plug the trimmer, in the OFF

8. On/O switch

position, into the mains and

9. Power indicator light

switch ON (If the battery is very

10. Cleaning brush

weak, wait about 1 minute).

11. Charging and storage base

IMPORTANT! Use only the adapter

that is supplied with the trimmer

IMPORTANT INFORMATION

Ref. E836XE Voltage = 3V – Current

REGARDING THE NI-MH

1000mA.

BATTERIES OF THIS UNIT

To obtain and maintain the

WATERPROOF

longest battery autonomy

For a greater comfort of use, your

possible, allow it to charge

E836XE trimmer is waterproof and

for 16 hours before using it

can even be used in the shower.

for the rst time and then

Easy to clean, it guarantees a

approximately every three

maximum hygiene.

6

ATTACHING AND REMOVING

• Begin at the nape. Place the

ACCESSORIES

guide on the scalp and move

Make sure that the unit is

the trimmer toward the crown of

switched o before changing the

your head. Move your trimmer

trimmer head or accessories.

slowly, pointing the teeth of the

To attach a head, t the base

guide slightly upward. Keep the

of the accessory onto the unit

trimmer in contact with your

pressing it until you hear a click.

head at all times. (Fig. 4)

To remove a head, hold the handle

• For the crown of the head, move

of the unit in one hand and push

from front to back, that is, from

up on the head with your free

your forehead to the crown of

your head.

hand to remove it (Fig.2).

• For the nishing touches, that is,

To remove the body comb guide,

around the nape and sideburns,

push up one side of the comb

use the trimmer without

(Fig.3).

a cutting guide. Turn your

trimmer over and move it from

USING THE CUTTING GUIDES

top to bottom. (Fig. 5)

Very practical, the cutting guide

guarantees equal cutting length.

• If you want a length greater

IMPORTANT: Always attach the

than 30 mm, or if you are

cutting guide BEFORE turning

experienced, you can create

the trimmer on, and turn it o

‘comb’ or ‘nger’ cuts:

before changing the guide.

- Work without a cutting guide.

The cutting length of your E836XE

- Take up a small section of hair

trimmer is manually adjustable.

with a comb or in your ngers.

To increase the cutting length,

- Move the comb or your ngers

push the cutting guide up.

along the section of hair to the

To reduce the cutting length,

desired length.

push it down.

- Cut your hair along the comb or

The selected length is displayed

your ngers.

at the back of the trimmer.

- Remove the cut hair using a

comb and check the evenness

CUTTING TECHNIQUES AND

of the cut regularly. (Fig. 6)

ADVICE FROM THE EXPERTS

HAIR

FACE

• Use the trimmer on clean, dry

For the beard or moustache just

hair.

the way you want it…

• To familiarise yourself with the

Decide on the type of beard or

trimmer, start with a longer

moustache that best suits your

cutting length and gradually

face taking into account the size

work through the shorter

of your face and natural growth

lengths to the one you want. In

and thickness of your beard and/

this way you’ll quickly nd the

or moustache. After deciding

cutting length that suits you

on the form of the beard and/or

best.

moustache, it is easy to maintain

• Always move the trimmer

its appearance by using the

against the direction of hair

trimmer as soon as you feel it is

growth.

necessary. For better results, we

7

recommend cutting the beard

achieve precise shaving.

when it is dry. This helps make the

The cutting guide used with

cut precise and comfortable.

the shaving head allows you

to determinate the hair length

To determine the shape of the

to 3mm when you don’t want

beard

to shave completely (for ex.

After having combed your beard

underarms).

in the direction of its natural

growth, decide on the desired

MAINTENANCE

shape by starting under the jaw.

Remove the cutting guide after

Come back up each side towards

each use.

the ears. Then continue on your

Cleaning the trimmer blades

cheeks towards the hair. Make

regularly will maintain their

sure you always trim or style your

optimal performance.

beard against the hair growth.

Removable blades

To make cleaning easier, the

For an irresistibly soft skin...

BaByliss trimmer blades can be

The shaving head adapts perfectly

removed. Make sure the trimmer

to the contours of your face and

is turned o. Hold the trimmer

gives even the most dicult parts

with the blades pointing up and

a close shave. Result: a neat and

remove them by pressing the top

precise cut in less time for an

of the blade. (Fig. 7)

impeccable look.

Brush the blades using the

cleaning brush to remove any

Patterning your hair and giving it

hair.

a perfect nish

Self-lubricating blades

Use the precision trimmer. Your

The blades of your trimmer have

precision trimmer comes with an

a reservoir pad for releasing the

exclusive special short cut blade.

necessary amount of oil for proper

Its narrow size (7mm) enables you

operation of your trimmers, time

to pattern your hair and beard

after time. Nevertheless, it is

with great accuracy.

recommended that it be relled

occasionally when you notice

To eliminate undesirable nose

performance is not as high.

and ear hairs

Remove the blades as described

Gently insert trimmer head into

above.

the ear or nose and cut the hairs.

Squeeze a few drops of BaByliss oil

NOTE! Only use in the opening of

onto the pad (Fig. 8).

the nostrils or ears to avoid any

Then replace the blades on the

risk of injury.

trimmer.

The BaByliss oil is specially

BODY

formulated for the trimmer, it

Thanks to this shaving head for

does not evaporate nor does it

body, you can trim or shave any

slow the blades.

part of your body quickly and

It is possible to obtain replacement

evenly (chest, stomach, legs, etc.)

blades when these are worn out

The shaving head includes 2

or damaged.

blades. These blades shorten

long hair and allow you to easily

8