Yamaha ns-f700: ATTACHING THE FRONT SPECIFICATIONS COVER

ATTACHING THE FRONT

SPECIFICATIONS

COVER

Type .........................................3-way bass reflex speaker system

Non-Magnetic shielding type

The speaker and the front cover are packed separately. To attach

Driver.............................................16 cm (6.5”) cone woofer × 1

the front cover, line up the projections (magnets) on the reverse

Advanced PMD

side of the front cover with their corresponding screw heads on the

13 cm (5”) cone mid-range × 1

speaker.

Advanced PMD

3 cm (1”) aluminum dome tweeter

DC diaphragm

Impedance...............................................................................6 Ω

Frequency Response ............................45 Hz to 50 kHz (-10 dB)

Nominal Input Power........................................................... 40 W

Maximum Input Power ...................................................... 160 W

Sensitivity ........................................................... 89 dB/2.83 V/m

Crossover Frequency ..............................................700 Hz/4 kHz

Dimensions (with stands)(W × H × D)

.. 354 × 1012 × 374 mm (13-15/16” × 39-13/16” × 14-3/4”)

Weight...........................................................25 kg (55 lbs. 2 oz.)

• Specifications subject to change without notice due to product

improvements.

• Care should be taken not to exceed the input power values noted

above.

• A speaker cable is not included with this model.

Taking care of the speaker

When you wipe this unit, do not use chemical solvents (e.g.,

Notes

alcohol or thinners, etc.): this might damage the finish. Use

• When removing the cover, be careful that you don’t touch

a clean, dry cloth. For difficult soils, dampen a soft cloth in

the drive units, and don’t exert excessive force with any

detergent diluted with water, wring it out, and then wipe with

tools.

the cloth.

• There are magnets on the reverse side of the front cover. Do

not place the front cover close to objects that might be

affected by magnets, such as CRT TV, clock, magnetic card,

diskette, etc., after removing it.

4 En