Yamaha Soavo-3: ATTACHING THE FRONT COVER SPECIFICATIONS

ATTACHING THE FRONT COVER

SPECIFICATIONS

The speaker and the front cover are packed separately. To

Type ............................3-way 3-speaker Bass Reflex speaker

attach the front cover, line up the six salients (magnet) on the

Non-Magnetic shielding type

reverse side of the front cover with the six corresponding pegs.

Driver............................................ 16 cm (6-1/2”) cone woofer

13 cm (5”) cone midrange

3 cm (1”) aluminum dome tweeter

Impedance ........................................................................ 6 Ω

Frequency response ......................35 Hz to 50 kHz (

– 10 dB)

to 100 kHz (

– 30 dB)

Nominal input power .......................................................40 W

Maximum input power ...................................................160 W

Sensitivity ....................................................... 87 dB/2.83 V/m

Crossover frequency ......................................450 Hz, 4.5 kHz

Dimensions (W x H x D)

Including stands ................................349 x 1051 x 487 mm

(13-11/16” x 41-3/8” x 19-3/16”)

Weight ...................................................26.5 kg (58 lbs. 7 oz.)

• Specifications are subject to change without notice due

to product improvements.

• Care should be taken not to exceed the input power

values noted above.

Taking care of the speaker

When you wipe this unit, do not use chemical solvents

(e.g., alcohol or thinners etc.): this might damage the

finish. Use a clean, dry cloth. For difficult soils,

Notes

dampen a soft cloth in water, wring it out, and then

• When the cover is not attached, take care not to touch

the speaker units with your hands or to exert excessive

wipe with the cloth.

force with tools.

• There are magnets on the reverse side of the front

cover. Do not place the front cover close to objects that

might be affected by magnets, such as TVs, clocks,

magnetic cards, diskettes etc. when you don’t attach it.

5 En