Gorenje DF 6116 BX: Description of the hood Operation

11. Complete the installation of the discharge tube.

Description of the hood

12. Open the extractable drawer (Fig.6) and apply the

Fig. 8

aesthetic Q mask (if supplied) with two screws from the

1 Control panel

inside of the hood (Fig, 7).

2 Grease filter (1 or 2 depending on the model in

13. Re-install the grease filters, connect the cooker hood to

possession)

the electrical mains and check the perfect operation.

3 Grease filter release handle

4 Lighting

5 Vapour screen (extractable), according to the model

available, which may be in metal, glass or provided with

grease filter.

6 Aesthetic mask (Available on the basis of the model in

possession).

7 Spacer (Available on the basis of the model in

possession).

8 Wall cabinet (not supplied, the cabinet illustration is

included to explain the type of installation).

Operation

The hood is fitted with a control panel with aspiration speed

selection control and a light switch to control cooking area

lights.

Use the high suction speed in cases of concentrated kitchen

vapours. It is recommended that the cooker hood suction is

switched on for 5 minutes prior to cooking and to leave in

operation during cooking and for another 15 minutes

approximately after terminating cooking.

a. ON/OFF lighting

b. OFF motors

c. - d. - e. Minimum suction power (c.), medium (d.),

maximum (e.).

11