LED LENSER H14R.2: инструкция

LED LENSER® * h14R.2

Operating instructions

Bedienungsanleitung

Instrucciones de uso

Mode d‘emploi

Gebruiksaanwijzing

Istruzioni per l‘uso

Käyttöohje

Bruksanvisning

Руководство по эксплуатации

󹭮󸴯

󱘆󲒡󴳜󲠾󲤨

󲑻󱎼

LED LENSER® * h14R.2

English ........................................... 02-05

Suomi ............................................. 27-30

Deutsch .......................................... 06-09

Svenska ......................................... 31-34

Español .......................................... 10-13

Pусский ......................................... 35-39

Français ......................................... 14-18

󺺲󸛃󹼊 ............................................ 40-43

Nederlands................................... 19-22

󲠕󲥜󴳎 .................................. 44-46

Italian.............................................. 23-26

󱁝󲞷 ...................................... 47-49

01

English | Page 02-05

GB

We are delighted that you have purchased one

You also can adjust the hinge of the headlamp.

of our products.

Depending on whether you want to illuminate

These are usage instructions to help you

an area in the distance or in front of you. For

familiarise yourself with your new purchase.

this you can simply tilt the part of the lamp

All the documents accompanying the product

head, which contains the reflector lens and

must be read attentively before using the

the white LED. The gradual detent allows also

product, preserved carefully and if the product

intermediate positions.

is transferred to a third party, the documents

must be handed over as well. This ensures that

4. Smart Light Technology (SLT)

maximum benefit is drawn from the product

The H14R.2 is equipped with our Smart Light

and questions from users are anticipated before

Technology (SLT). Thanks to the use of a

they arise.

microcontroller, the light output of the white

Above all, comply with the warnings and safety

front LED can be controlled and the user can

instructions and dispose of the packaging

use various Energy Modes, Light Programs and

material properly.

Light Functions. The red rear light also has two

light functions. Through the front switch and the

Additional information for H14R.2 with “TEST-

“Multi-function Wheel" switch on the back, the

IT” function

handling is simple and user-friendly. To turn the

Your LED LENSER H14R.2 headlamp is

headlamp on and off and to select the various

packaged with a “TEST-IT” function (item no.

Light Functions etc., the front switch has to be

7399-R). This allows users to test the brightness

used. (see point 5).

while the product is still in the package. For

What basically applies is that the brightness

testing, simply push the yellow “TEST-IT” button

of the H14R.2 is monitored by the in-built

on the front of the package. When testing, please

temperature control unit.

do not look directly into the light.

The “TEST-IT” button is connected to the battery

5. Light Programs and Light Functions

housing of the H14R.2 via two wires and should

In the H14R.2 are equipped with one white LED

be removed prior to use.

(LED = Light Emitting Diode) ,

To remove the “TEST-IT” button and wires, open

The white LED is very strong, ideal for normal

the battery box rear cover and remove 4xAAA

use, for example if the Speed Focus or the

alkaline battery (see also “Changing of the

adjustment of the angle of light beam to the

battery “further below). Separate the two “TEST-

horizontal should be used. This very bright

IT” button wires from the battery housing by

white light might be not good when your eyes

pulling on each wire until it releases from the

have become accustomed through the so-called

battery housing. Insert the battery and noting

dark adaptation to low ambient light.

the correct polarity. Close the battery box rear

cover. Please dispose and recycle the packaging

5.1 Light Program White (Front light)

and “TEST-IT” button with the wires according to

In H14.2, there are three different modes (Easy

the local regulations.

Low, Easy Power, Signal). The default mode is

Easy Low.

Product

7299-R, LED LENSER® H14R.2

When the product is off, press the “Multi-function

7399-R, LED LENSER® H14R.2 (Blister)

Wheel” switch the for 5 second, it will achieve

mode transition, blink for one time, that means

Version of the operating manual: 1.3

you has entered sub-mode one; blink for two

times, that means you has entered sub-mode

1. Battery set:

two; and 3 times blink for three times, that

1 x Li-ion battery pack 3.7 V 4400mAh

means you has entered sub-mode three.

4XAA alkaline battery (Blister)

a) Light Mode one - Easy Low: when the product

2. Switching on and off

is off, push the front switch hardly until you hear

The H14R.2 has two switches. The front switch

click sound, the white LED will glows with lower

is located on the right side of the headlamp

brightness (light function: Low Power); second

housing. This switch button is used to turn the

touch the white LED will glows full brightness

H14R.2 ON/OFF. It is also used to activate the

(light function: Power), third time touch the

various Light Programs and Lighting Functions

button is off;

(see section 5.1) and the “Transport Lock”

function (see Point 7). The “Multi-function

b) Light Mode two - Easy Power: when the

Wheel” switch is located on the backside at the

product is off, push the front switch hardly until

upper part of the battery box. This allows you

you hear click sound, the white LED will glows

to adjust the brightness and flash rate infinitely

with full brightness (light function: Power);

and to change into different modes. In this

second touch the white LED will glows with

switch is also a battery indicator and the red

lower brightness (light function: Low Power),

rear light located (see Section 5).

third time touch the button is off;

3. Focus

c) Light Mode three - Signal: when the product

In the front, narrower region of the headlamp

is off, push the front switch hardly until you hear

housing is the reflector lens through which the

click sound, the white LED will glows with full

light of the white LED is focusable. The light

brightness (light function: Power); second touch

is focusable through our patented "Advanced

the white LED flashes frequently (12 Hz) (light

Focus System", by pushing easily the lamp head

function: Signal), third time touch the button is

forward and backwards (Speed Focus).

off;

02

LED LENSER® * h14R.2

When the headlamp is on, rotate the “Multi-

seconds. Then you change the mode between

function Wheel" switch on the back to adjust the

„energy mode“ and „constant current mode“.

LED brightness based on your needs. Turning

left: the brightness of white LED will getting

a) Constant current mode: In case the

lower.Turning right: the brightness of white LED

brightness reduces immediately in 2 seconds,

will getting brighter (except the strobe function).

the H14R.2 is on constant current mode;

The LED will blink once to indicate the maximal

and minimum brightness.

b) Energy saving mode: in case the brightness

reduce gradually to zero, the H14R.2 is in the

d) Boost mode: in each setting, push the front

Energy Mode.

switch for 2 seconds, you will enter to boost

mode, after a short time the flashlight will

With this procedure, you can switch between

return to previous choosing.

the two Energy Modes. It is not possible to

All Light Functions above are in a loop. You can

determine in which Energy Mode the H14R.2

change the functions by press the switch button.

is. To find this out, you must carry out the

Note: when switching between modes, press the

procedure. If the H14R.2 is thereafter not in the

“Multi-function Wheel” switch no longer than 2

desired Energy Mode any more, you must repeat

seconds, otherwise the product will turn off.

the procedure again. The flashlight will reset to

energy saving mode if you change the battery or

5.2 Light Program Red (rear light)

cut the power.

ON-OFF/ change the function within 2 seconds.

More than 2 seconds the lamp will turn off) /

7. „Transport Lock“

charge indicator/ battery capacity indicator

When the H14R.2 switched Off, press the front

function is available for the red LED:

switch for approx. 5 seconds till the light turns

off in order to enable the “Transport Lock.” The

1) ON-OFF function: in any status, two red LED

H14R.2 cannot be turned on any more, either

will light up by pressing the “Multi-function

intentionally or unintentionally. Accidental

Wheel” switch once: the LEDs will start to blink,

power consumption is not possible.

by pressing the switch twice; at the third push

To deactivate the “Transport Lock”, just press

the LEDs will turn OFF.

the front switch again for 5 seconds. The

headlamp will now return to the Light Program.

2) Charge indicator function: the red LED will

glows when charging, after full charge, the LED

8. Reset function

will glows green, please be noticed that the

If the Accumulator-Pack, the alkaline batteries

white LED couldn’t working when charging;

are taken out the battery box you have "reset"

the H14R.2. You have thus reset a few functions:

3) Battery capacity indicator: when you start to

The „Transport Lock“ (see Point 7) is

use white LED, the red LED on the battery box

deactivated.

will glows for 5 seconds and then off, green

The Light Function Dim (see Point 5.1) is set to

means the battery capacity is 50%-100%; yellow

low brightness.

means the battery capacity is 20-49%; when the

As Energy Mode Energy Saving is active (see

red LED is glows means the battery capacity is

Point 6).

lower than 19%, it’s not suit for long time use,

The Light Program White (see Point 5.1) is

you need to charge the battery.

activated.

6. Energy Modes

9. Charging

By selecting one of the two Energy Modes

The H14R.2 indicates by the flashing of the

(Energy Saving or Constant Current), you take

white LED that it is running out of energy in

a decision on how the energy contained in the

near future. Please charge the Accumulator-

accumulator respectively in the batteries is

pack in time. Charge the Accumulator-pack of

used.

your H14R.2 in a dry place and only by using the

charger that is included in the delivery or by a

6.1 Energy Saving: The light output is controlled

USB port (see below).

by the integrated Smart Light Technology (SLT).

The following information applies only to the

The brightness is matched to the real conditions

included accessories. You cannot charge any

that occur during normal use of the lamp, thus

other accumulators or batteries in the H14R.2.

providing a longer burn time.

In case Li-ion Accumulators are used, they must

be charged in approved external chargers.

6.2 Constant Current: This Energy Mode allows

In the scope of delivery of the H14R.2 there

the continuous use of all the Light Functions

is a plug and a charger. In case both are not

with a more or less constant light output. This

connected already please connect them so that

Energy Mode is to be preferred when a high

the connection clicks.

brightness level is more important than a long

The charger of H14R.2 has a USB port, which

burn time

must be connected with the corresponding

port at the supplied charging cable in order to

Changing of the Energy Modes

charge Accumulator-pack. The other side of the

Changing the Energy Modes can only be done

charging cable (micro USB) must be connected

when the flashlight is in Light Program White

to the micro USB port on the battery box.

and the lamp is turned Off. To change the energy

The last step is to connect the plug into a socket

mode, with the white LED off, press the “Multi-

(Input: 100 V to 240 V / 50 Hz to 60 Hz). When

function Wheel” on the back 8 times, then on the

charging is completed (after maximum 4 to

8th click keep the knob pressed for approx. 2-4

5 hours), unplug the charger from the socket

03

GB

again and the charging cable (micro-USB) of the

period, please take out the Accumulator-Pack

Accumulator-pack. But it is no problem to go

respectively the NiMH-Accumulators / alkaline

on loading the Accumulator-pack although it is

batteries in order to avoid damage.

already full.

Used batteries and accumulators have to be

Instead of connecting the charging cable to the

taken out the item and disposed of in keeping

USB port of the charger, you can also connect

with the national laws.

it to a different USB port (5 V / 900 mA) e.g. of a

computer.

13. Disposal for rechargeable batteries and

While using our optionally available car USB

non-rechargeable batteries

charger connection (Led Lenser Car Charger:

Basically, the possibility of short-circuits of

Item no. 0380), the H14R.2 also can be charged

accumulators and batteries must be eliminated

at the cigarette lighter and sockets in vehicles.

and they may neither be opened, nor enter the

These accessory units match themselves

human body in any way, nor may they be thrown

automatically to the respective input voltage

into a fire.

(12 V ó 24 V). These alternatives are suitable to

charge the Accumulator-pack in case a power

14. Cleaning

outlet is not available.

For cleaning, please use a dry, lint-free, clean

Note – Please ensure that there is no short-

cloth.

circuit at the charging contacts. The charging

If salt water is spilled on the head lamp, it must

contacts may not be touched with moist or

be immediately entirely removed with such a

metallic objects.

cloth.

The headband can be washed in a washing

10. Charge indications

machine at 30 °C.

In case you are charging the Accumulator-Pack

of the H14R.2 with the corresponding charger

15. Scope of delivery

and charging cable respectively by a USB port

The H14R.2 incl. headband is supplied with the

(see Point 9) the status LED at it glows while

following accessories:

charging in red and the light changes to green

1xH14R.2 headlamp;

when the charging is completed. The white LED

1xcharger and plug;

of H14R.2 couldn’t use while charging.

1xUSB cable, connect the rechargeable battery

and charger for charge;

11. Changing of the Accumulator-Pack / Li-ion-

1xLi-ion battery pack;

Accumulator / Alkaline batteries

1x user manual.

Prior to the change, please turn off the H14R.2.

On the button side of the head lamp battery box

16. Caution

there is the gate of the battery box. Open the

Do not swallow any small parts or batteries/

battery box rear cover, remove the battery, and

accumulators that are present. The products

then insert a new one.

or parts thereof (including batteries /

Also alkaline batteries can be inserted. But then

accumulators) must be stored outside the reach

the charger cannot be used!

of children.

During insertion, it is always necessary that

For reasons of safety and approval (CE), the

this is in the correct direction. Therefore, pay

product must not be modified and/or changed.

attention to the polarities (+ and -) both in the

The product is to be used exclusively as an

battery box and also on the Accumulator-Pack

accumulator or battery powered lamp. If the

/ alkaline batteries. Otherwise, the hypothetical

H14R.2 is used for any other purpose, or used

risk that Accumulators / batteries are damaged

incorrectly, it can get damaged and hazard-

and may explode.

free use is not guaranteed any more (danger

The supplied Accumulator-Pack can only be

from fire, short-circuit, electric shock etc.).

recharged with the original charger or by a USB

There is then no liability for harm to persons

port (see Point 9)!

or damage to property, and the warranty of the

After replacing the cover of the battery box has

manufacturer is also rendered null and void.

to be closed again.

The temperature range in which the H14R.2

can be operated is -20 C° to +50 C°. Ensure that

12. Headband

the H14R.2 is not subjected to more extreme

The headband can be washed, and please refer

temperatures, intense vibrations, explosive

to the picture about how to disassemble and

atmosphere, solvents and / or vapors. Also

assemble the headband.

continuously exposed to direct sunlight, high

humidity and/or moisture have to be avoided.

13. Rechargeable batteries / Accumulators

Changes, repairs and maintenance over and

Non rechargeable batteries or other

above those described in the documents

accumulators that are not of the same type as

accompanying the product may only be carried

the accumulator that is scope of delivery are not

out by authorized technical personnel.

allowed to be charged by the charger. Never use

Once it is found that the product is filled with full

non rechargeable batteries and accumulators

batteries / accumulators in correct orientation

together. Change always all non-rechargeable

(polarity!) and correctly closed, but nonetheless

batteries and accumulators at the same time.

a normal, safe operation is not possible or the

Use in the H14R.2 below batteries can be used

product shows damage, it must be rendered

4 x AA alkaline / 4 x AA Ni-MH / 4 x CR123A

inoperative and not used any further. In this

Lithium batteries / 4xCR123A rechargeable

case, for warranty matters, contact your dealer.

Lithium batteries / 2 x ICR 18650 batteries / Li-

ion battery pack.

17. Safety instructions

If you intend not to use the item for an extended

This product is not a children's toy.

04