LED LENSER SEO™ 5: инструкция

LED LENSER® * SEO 5

Operating instructions

Bedienungsanleitung

Instrucciones de uso

Mode d‘emploi

Gebruiksaanwijzing

Istruzioni per l‘uso

Руководство по эксплуатации

󹭮󸴯

󱘆󲒡󴳜󲠾󲤨

󲑻󱎼

LED LENSER® * SEO 5

English ........................................... 02-05

Italian.............................................. 23-27

Deutsch .......................................... 06-10

Pусский ......................................... 27-32

Español .......................................... 11-14

󺺲󸛃󹼊 ............................................ 33-36

Français ......................................... 15-19

󲠕󲥜󴳎 ............................................ 37-39

Nederlands................................... 19-23

󱁝󲞷 ................................................. 40-42

1

2

01

English | Page 02-05

GB

We are delighted that you have purchased one

3. Focus

of our products.

In the front, narrower region of the headlamp

These are usage instructions to help you

housing is the reflector lens through which the

familiarise yourself with your new purchase.

light of the white LED (see Point 5.1) is focused.

All the documents accompanying the product

The reflector lens is held by a plastic ring. You

must be read attentively before using the

can rotate that plastic ring using two fingers,

product, preserved carefully and if the product

and thus adjust the focus quickly and easily.

is transferred to a third party, the documents

This so-called Speed Focus allows to adjust

must be handed over as well. This ensures that

the angle of the white light beam continuously.

maximum benefit is drawn from the product

Depending on whether you want to illuminate

and questions from users are anticipated

an area in the distance or in front of you, you

before they arise.

also can adjust the angle of light beam to the

Above all, comply with the warnings and safety

horizontal. For this you can simply tilt the part

instructions and dispose of the packaging

of the head lamp, which contains the reflector

material properly.

lens and the white LED. The screening allows

using also intermediate positions.

Additional information for SEO with TEST IT

function

4. Smart Light Technology (SLT)

Your LED LENSER SEO 5 headlamp with the

The SEO 5 is equipped with our Smart Light

item no. 6105 or 6106 (item no. 6005 and

Technology (SLT). Thanks to the use of a

6006: No TEST IT function ) is packaged with

microcontroller, the light output of the LED

a TEST IT function. This allows users to test

can be controlled and the user can use various

the brightness while the product is still in the

Light Programs and Light Functions. By using

package. For testing, simply push the yellow

a single switch it was possible to design the

TEST IT button on the front of the package.

interface to be simple and user-friendly. The

When testing, please do not look directly into

SEO 5 can give the user light in different ways.

the light.

There are thus two Light Programs and a

The TEST IT button is connected to the battery

number of Light Functions available. To switch

housing of the SEO 5 via two wires and should

the pocket torch on and off and to select the

be removed prior to use.

various Light Functions etc., the switch (see

To remove the TEST IT button and wires,

Point 2) has to be used.

open the battery housing and remove the 3

What basically applies is that the brightness

x AAA batteries (see also “Changing of the

of the SEO 5 is monitored by the in-built

Alkaline batteries / Accumulator-Pack / NiMH-

temperature control unit.

Accumulators” further below). Separate the

two TEST IT button wires from the battery

5. Light Programs and Light Functions

housing by pulling on each wire until it releases

In the SEO 5 are two LEDs (LED = Light Emitting

from the battery housing. Insert the 3 x AAA

Diode) installed.

batteries respectively accumulators noting

The white LED is very strong, ideal for normal

the correct polarity. Close the battery housing.

use, for example if the Speed Focus or the

Please dispose and recycle the packaging and

adjustment of the angle of light beam to the

TEST IT button with the wires according to the

horizontal should be used. This very bright

local regulations.

white light might be not good when your eyes

have become accustomed through the so-

Product

called dark adaptation to low ambient light.

6005, LED LENSER® SEO 5 grey

Otherwise than with the use of the white light,

6105, LED LENSER® SEO 5 grey (Blister)

it remains the current adjustment of the eye

6006, LED LENSER® SEO 5 red

to low brightness obtained when the red light

6106, LED LENSER® SEO 5 red (Blister)

of the second LED is used. The focus and the

angle of the light to the horizontal of the red

Version of the operating manual: 1.1

LED, which is located laterally next to the

reflector-lens, can not be adjusted.

1. Battery set:

In order to switch between the white and the

- 3 x Alkaline batteries AAA/LR03/Micro

red LED, when the SEO 5 is off, press and hold

(1.5 V DC) (scope of delivery) or

the switch button for 2 seconds. The head lamp

- 1 x Accumulator-Pack of SEO 7R

will change from red to white or from white to

(not scope of delivery) or

red, and then release the switch button before

- 3 x NiMH-Accumulator AAA/LR03/Micro

the lights go out, because if you press too long

(1.2 V DC) (not scope of delivery)

the switch button you activate the „Transport

Lock“ (see section 6)!

2. Switching on and off

The points below deal with the Light Functions

In the upper part of the headlamp housing of

of the white LED (Light Program White / Point

the SEO 5, between battery box and the part

5.1) and the red LED (Light Program „Red Night

with the reflector lens, there is the switch

Vision“ / Point 5.2).

button. This switch button is used to turn the

SEO 5 on. It is also used to activate the various

5.1 Light Program White

Light Programs and Lighting Functions (see

If the Light Program White is enabled (see

section 5) and to switch between white light

Point 5), you can use the white, focusable light

and red light (see Point 5). In addition, you can

of the headlamp.

also activate the “Transport Lock” (see Point 6).

When the switch button is pushed, while the

SEO 5 is off, the headlamp glows in the Light

Function Power at full brightness. When you

02

LED LENSER® * SEO 5

push a second time within 2 seconds, the SEO5

Only when you hold the switch button pressed for

glows with lower brightness (Light Function

5 seconds again this function („Transport Lock“)

Dim). When you push the second time within

is deactivated again and the lamp is in the Light

2 seconds but keep the button pressed down,

Program White.

you can change the brightness infinitely. For

the time that the switch button is pressed, the

7. Reset function

brightness varies between full and reduced

If the used alkaline batteries, NiMH-

brightness. The SEO 5 extinguishes (blinks)

Accumulators or an Accumulator-Pack of a

for a short moment as soon as the highest or

SEO 7R are taken out the battery box you have

lowest brightness is reached. At both ends of

"reset" the SEO 5.

the SEO 5 goes off shortly, and then again to

You have thus reset a few functions:

be lighter or darker(a blinking signal happened

- The „Transport Lock“ (see Point 6) is

at both ends). When you release the switch

deactivated

button you lock the current brightness. This

- The Light Function Dim (see Point 5.1) is set

brightness is retained for the Light Function

to low brightness

Dim even if you turn the head lamp off.

- The Light Program White (see Point 5) is

After the Light Function Dim (altogether 3

activated

times fast switching, i.e. you do not wait longer

than 2 seconds between each switching) comes

8. Use of rechargeable batteries

the Light Function Signal (slow even flashing)

The SEO 5 indicates by the flashing of the red

in the Light Program White.

LED that it is running out of energy in near

Additional switching turns SEO 5 off and the

future. Please change the batteries respectively

circle starts again with the Light Function

the accumulators in time.

Power when you press the switch button again.

In the scope of delivery of the SEO 5 are alkaline

So the Light Functions are in a loop. But please

batteries. These can not be charged!

note that you turn off the head lamp by every

switching if since the previous switching more

The following information applies only in case

than 2 seconds have elapsed. For example in

you use in your SEO 5 NiMH-Accumulators

case you let pass more than 2 seconds after

respectively the Accumulator-pack of a SEO

you turned the Light Function Dim on the next

7R. These are not scope of delivery of SEO 5!

switching will not change to head lamp to Light

Function Signal but will turn the SEO 5 off.

In case NiMH-Accumulators (see Point 1) are

used, these must be charged in approved

5.2 Light Program „Red Night Vision“

external chargers.

If the Lighting Program „Red Night Vision“ is

Always charge in a dry place!

enabled (see Point 5), you can use the red light of

the head lamp.

Do you use the Accumulator-Pack of a SEO 7R

When the switch button is pressed, when the SEO

please note that this can only be charged with

5 is off, the head lamp glows in the Light Function

the charger and the charger cable of the SEO

Power at full brightness in red. When you switch

7R or by a USB port (see below)!

a second time within 2 seconds, the SEO 5 blinks

In case the plug and the charger are not

in the Light Function Signal (slow even flashing).

connected already please connect them so that

The Light Function Signal is the last Light

the connection clicks.

Function that can be used in the Light Program

The charger of SEO 7R has a USB port, which

“Red Night Vision” so additional switching turns

must be connected with the corresponding

SEO 5 off and the circle starts again with the

port at the charging cable in order to charge

Light Function Power when you press the switch

the SEO 7R Accumulator-pack. The other

button again.

side of the charging cable (micro USB) must

So the Light Functions are in a loop. But please

be connected to the Accumulator-pack. You

note that you turn off the head lamp by every

will therefore have to open the battery box

switching if since the previous switching more

possibly. The Accumulator-pack of SEO 7R

than 2 seconds have elapsed. For example in

has two charging ways, either it loaded in the

case you let pass more than 2 seconds after

battery box of SEO 5 or can be removed out of

you turned the Light Function Power on the next

the battery box for charging. The charger of the

switching will not change to head lamp to Light

SEO 7R can only be used for charging of this

Function Signal but will turn the SEO 5 off.

Accumulator-pack.

The last step is to connect the plug into a

6 „Transport Lock“

socket (Input: 100 V to 240 V / 50 Hz to 60 Hz).

Under Point 5 it has been described how to

When charging is completed (after maximum 2

switch between the white and the red LED. This

to 3 hours), unplug the charger from the socket

takes place when the SEO 5 is off and the switch

again and the charging cable (micro-USB) of

button is pressed only for approx. 2 seconds. The

the Accumulator-pack. But it is no problem to

head lamp will change from red to white or from

go on loading the Accumulator-pack although it

white to red. But when the switch is pressed

is already full.

longer (approx. 5 seconds) until the light turns off

you have enabled the „Transport Lock“. Then the

Instead of connecting the charging cable of the

SEO 5 can not be turned on again but the red LED

SEO 7R to the USB port of the charger, you can

flashes for a short moment to indicate that this

also connect it to a different USB port (5 V /

function is activated in case the switch button is

900 mA) e.g. of a computer.

pressed. The SEO 5 therefore cannot be switched

While using our optionally available car USB

on, either intentionally or unintentionally and

charger connection (Led Lenser Car Charger:

inadvertently consume energy.

Item no. 0380), the Accumulator-pack also can

03

GB

be charged at the cigarette lighter and sockets

circumferences.

in vehicles. These accessory units match

themselves automatically to the respective

12. Rechargeable batteries / Accumulators

input voltage (12 V / 24 V). These alternatives

Non rechargeable batteries (e.g. Alkaline

are suitable to charge the Accumulator-pack in

batteries) are not allowed to be charged.

case a power outlet is not available.

Never use non rechargeable batteries and

accumulators together. Change always all non

Note – Please ensure that there is no short-

rechargeable batteries and accumulators at

circuit at the charging contacts. The charging

the same time. Use in the SEO 5 only Alkaline

contacts may not be touched with moist or

batteries AAA/LR03/Micro (1.5 V DC), the

metallic objects.

Accumulator-Pack of the SEO 7R or NiMH-

Accumulators AAA/LR03/Micro (1.2 V DC).

9. Charge indication

If you intend not to use the item for an extended

In case you are charging the Accumulator-Pack

period, please take out the alkaline batteries

of the SEO 7R with the corresponding charger

respectively Accumulator-Pack of a SEO 7R /

and charging cable respectively by a USB port

NiMH-Accumulators in order to avoid damage.

(see Point 8) the status LED at it glows while

Used batteries and accumulators have to be

charging in red and the light changes to green

taken out the item and disposed of in keeping

when the charging is completed.

with the national laws.

10. Changing of the Alkaline batteries /

In general, for the disposal of batteries as

Accumulator-Pack / NiMH-Accumulators

well as particularly for Lithium batteries,

Prior to the change, please turn off the SEO 5.

accumulators and accumulator packs, the

On the wide side of the head lamp housing

applicable rule is that they may only be

there is the cover of the battery box. Nearby

disposed of in discharged state and in a

the switch button there is a plastic lip. If this lip

technically correct manner. Additionally before

is carefully pressed with e.g. your thumb up a

disposal it has to be ensured, by sticking non-

little, the battery box cover can be folded down

conducting adhesive tape over the contacts

by using the small notches that are left and

that short-circuits are not possible.

right next to the switch button.

Basically, the possibility of short-circuits of

You can now remove the Alkaline batteries

accumulators and batteries must be eliminated

(respectively NiMH-Accumulators or the Accu-

and they may neither be opened, nor enter

mulator-Pack of a SEO 7R) and insert new ones.

the human body in any way, nor may they be

During insertion, it is always necessary that

thrown into a fire.

this is in the correct direction. Therefore,

pay attention to the polarities (+ and -). Both

13. Cleaning

in the battery box and also on the alkaline

For cleaning, please use a dry, lint-free, clean

batteries. Otherwise, the hypothetical risk that

cloth.

Accumulators / batteries are damaged and

If salt water is spilled on the head lamp, it must

may explode.

be immediately entirely removed with such a

After replacing the cover of the battery box has

cloth.

to be closed again.

The headband can be washed in a washing

machine at 30 °C.

Also NiMH-Accumulators and the Accumulator-

Pack of a SEO 7R can be inserted (see Point 8).

14. Scope of delivery

The SEO 5 incl. headband is supplied with the

11. Headband

following accessories:

If the headband is not already connected to the

- Alkaline batteries AAA/LR03/Micro (1.5 V DC)

lamp unit, proceed as follows.

- Operating manual

Thread the end of headband with the narrow

plastic part from the front through the eyelet

Additional accessories for the SEO 5 are being

on the left side of the head lamp housing.

designed. You can get information on these

Note the orientation of the lettering on the

additional accessories over and above the

headband. Run the headband then over the

supplied kit on our Internet page.

cover of the battery box to the eyelet on the

other side of the battery box and run it through

15. Caution

it to the front.

Do not swallow any small parts or batteries/

This end of the headband has got to be pulled

accumulators that are present. The products

through the hole beside the clipper at the

or parts thereof (including batteries /

plastic part on the other side of the headband.

accumulators) must be stored outside the

This elongate hole has got 4 small bars

reach of children.

through which the narrow plastic part has to

For reasons of safety and approval (CE), the

be run from the side.

product must not be modified and/or changed.

This allows that the complete end is pulled

The product is to be used exclusively as

through this hole and both ends of the

battery or accumulator powered lamp. If the

headband are connected to each other.

SEO 5 is used for any other purpose, or used

By using the eye of the clipper the SEO 5 can e.g.

incorrectly, it can get damaged and hazard-

attached to an ear of a belt or a backpack for

free use is not guaranteed any more (danger

transportation.

from fire, short-circuit, electric shock etc.).

The third plastic component at the headband

There is then no liability for harm to persons

can be used to adjust the length of the

or damage to property, and the warranty of the

headband in order to fit different head

manufacturer is also rendered null and void.

04