Fieldmann FZS 2002-E: 9. MAINTENANCE

String trimmer startup | Maintenance | Technical specifications

WARNING! RISK OF INJURY! Cutting elements keep rotating for a certain time after the

motor was switched off. • Do not attempt to stop the cutting element (nylon string) by your

hands. Let it stop by itself.

Note: Recommendation: When cutting grass in the operation position A, set the angle

between the cutting blades and ground to ca. 10°, you will reach the optimum performance

of the trimmer. When operating, you can hold the string trimmer and move it from left to right

and consequently from right to left. You will reach the optimum performance of the electric

string trimmer. (Fig. 15).

9. MAINTENANCE

The trimmer string can dry out in the process of time. To keep the nylon string in a perfect

condition, store the spare pre-wound spools or loose string in a plastic bag with a spoon of

water.

clean the string trimmer, remove the battery and use a mild soap and a damp cloth only.

Do not immerse the trimmer in water, nor hose it down. Avoid any liquid to get inside the

string trimmer. Do not use pressurized water when cleaning the machine.

The line-cutting blade on the safeguard side can get blunt. Regular sharpening of the blade

with a file is recommended.

10. TECHNICAL SPECIFICATIONS

Voltage / frequency 230-240V~/50Hz

Input power 500W

No-load speed 11000 rpm

Cutting width 300mm

Instructions Manual - language version only.