Fieldmann FZS 2002-E: 8. STRING TRIMMER STARTUP (Fig. 14)

Operation | String trimmer startup

Adjustment of Trimming Head Angle (Fig. 9)

The trimmer head can be set to 4 different operation positions.

Press the „PUSH“ button by one hand and turn the trimmer head to the desired position by

other hand. The „PUSH“ button will lock the head automatically.

Adjustment of Handle Length and Angle (Fig. 10)

Turn the locking sleeve (A) in the „UNLOCK“ direction and extend the upper part of the handle

to the desired length. Then, turn the locking sleeve (A) in the „LOCK“ direction and tighten

firmly.

Pull the locking screw (B) upwards in the direction „1“. Turn the upper part of the handle in the

direction „2“ to the operation position 0°, 90°, 180°. • The operation position 0° is intended

for grass mowing only. • The operation positions 90° and 180° are intended for edge

mowing only.

Adjustment of Adjustable Handle Angle (Fig. 11)

Press the lock button and turn the adjustable handle to the desired position.

There are 7 operation positions available.

Then, tighten the lock button firmly.

Adjustment of Edge Guide Wheel Assembly Angle (Fig. 12)

Release the lock knob and turn the edge guide wheel assembly to the desired angle.

The positions „1“, „2“, „3“ are the available operation positions.

In case you do not use the edge guide wheel assembly, you can either remove it from the

trimmer or set it to the position „4“.

Safeguard Adjustment (Fig. 13)

Position „1“ is the parking position; position „2“ is the operation position.

Turn the safeguard (A) to the desired position, until the lock gets engaged.

8. STRING TRIMMER STARTUP (Fig. 14)

Switching the Trimmer ON

Push and hold the safety button (A), and then press the trigger (B) on the handle.

Release the safety button (A).

Switching the Trimmer OFF

Release the trigger (B) on the handle.