Fieldmann FDV 2002-E: 5. APPROPRIATE APPLICATION

Safety instructions | Appropriate application | Adjustment and operation

WARNING! While impact drilling, wear suitable ear protective equipment. Exposure to the

excess noise levels can cause hearing loss.

WARNING! Use auxiliary handles supplied with the tool. Loss of control can cause a

serious personal injury.

5. APPROPRIATE APPLICATION

The FDV 2001- E and FDV 2002- E tools are intended for impact drilling in bricks and concret

and drilling in wood, metal, ceramics and plastics.

The tools equipped with electronic controls and right/left rotation are also suitable for

screwing and threading.

Use the machine and accessories only for the above mentioned applications. All other

applications are expressly ruled out.

6. ADJUSTMENT AND OPERATION

Impact/Standard drilling selector

Function

- use the drilling function to drill holes in wood or metal.

Move the selector 6 to the right.

Function

- use the impact drilling function to drill holes in concrete.

Move the selector 6 to the left.

Variable speed control

Variable speed is controlled by pressing the trigger and adjusting the knob on the switch.

Set the “reversing” and “forward” switch to get clockwise and anti-clockwise rotation.

The power tool works with variable speed between 0 and maximum speed depending on

pressure you put on the master switch 1.

Lower pressure results in lower speed and facilitates the smooth, properly controlled start of

the drilling operation.

Do not overload the power tool; it would stop.

Chuck

The chuck of reversible drills is always fixed by a screw with a left hand thread.

Loosen the screw prior to chuck removal.